PCI-6030E 多功能数据采集卡 自动采集非电量或者电量信号

PCI-6030E是多功能数据采集卡。

PCI-6030E数据采集卡具有16路模拟输入、16路数字I/O、8路计数器多功能，采样频率为250kHz/通道，输入范围可编程，同时具有FIFO缓冲、硬件滤波、仪器触发、DMA传输等功能。

PCI-6030E数据采集卡广泛适用于各种数据采集应用，如机器视觉、机器人、工业自动化和科学仪器等。

数据采集模块的工作原理是利用无线模块、传感器从系统外部采集数据并输入到系统内部进行数据统计。

PCI-6030E数据采集又称数据获取，是利用一种无线模块、传感器，从系统外部采集数据并输入到系统内部进行数据统计的一个应用系统，PCI-6030E其工作原理是从无线模块和传感器其它待测设备等模拟和数字被测单元中自动采集非电量或者电量信号，送到计算机系统中进行分析、处理。

National Instruments PCI-6030E 多功能数据采集系统

NI PCI-6030E（部件号：777384-01）是一款用于PCI计算机的多功能DIO、AI、AO和TIO数据采集（DAQ）卡，具有8条数字I/O线、2个16位模拟输出和广泛的信号调理选项。该型号提供 16 个单端或 8 个差分模拟输入，分辨率为 16 位，输入范围为 ±0.1 至 ±10 V。该型号可通过其两个模拟输出在 ±10 V 范围内生成 100 kS/s 的输出。对于兼容 TTL 的 DIO，还提供 8 条线路。

NI PCI-6030E 没有 任何 DIP 开关、 电位 计 或 跳线， 因此 可以 轻松 通过 软件 进行 配置 。对于所有I/O连接，此DAQ上都提供了一个68针公头SCSI-II连接器。NI PCI-6030E 支持来自 AI <0...15> 或 PFI0 的模拟触发。该型号的模拟输出端带有逐次逼近型模数转换器 ADC 和双缓冲数模转换器 （DAC）。

就其模拟输出特性而言，PCI-6030E带有一个2048样本大小的FIFO缓冲器，可以在三种模式下传输数据：中断、编程I/O和DMA模式。可用的 DMA 模式包括分散-收集、需求传输和单次传输。该多功能DAQ支持直流输入耦合，每个输入端的最大允许电压为接地的±11 V。过压保护设置为在上电状态下触发 ±25 V 跳闸，在断电状态下触发 ±15 V 跳闸。

PCI-6030E 多功能数据采集卡 自动采集非电量或者电量信号

PCI-6030E is a multi-function data acquisition card.

PCI-6030E data acquisition card has 16 analog input, 16 digital I/O, 8 counter multi-function, sampling frequency is 250kHz/ channel, input range is programmable, and has FIFO buffering, hardware filtering, instrument trigger, DMA transmission and other functions.

The PCI-6030E data acquisition card is widely used in a variety of data acquisition applications, such as machine vision, robotics, industrial automation and scientific instruments.

The working principle of the data acquisition module is to use the wireless module and sensor to collect data from the outside of the system and input it into the system for data statistics.

PCI-6030E data acquisition, also known as data acquisition, is an application system that uses a wireless module and sensor to collect data from the outside of the system and input it to the inside of the system for data statistics. The working principle of PCI-6030E is to automatically collect non-power or power signals from analog and digital measured units such as wireless modules, sensors and other devices to be measured. Send to the computer system for analysis and processing.

National Instruments PCI-6030E multi-function data acquisition system

The NI PCI-6030E (Part number: 777304-01) is a versatile DIO, AI, AO, and TIO data acquisition (DAQ) card for PCI computers with eight digital I/O lines, two 16-bit analog outputs, and a wide range of signal conditioning options. The model offers 16 single-ended or 8 differential analog inputs with 16-bit resolution and input ranges from ±0.1 to ±10 V. This model can generate an output of 100 kS/s in the ±10 V range through its two analog outputs. For TTL-compatible DIO, 8 lines are also available.

The NI PCI-6030E does not have any DIP switches, potentiometers, or jumpers, so it can be easily configured with software. A 68-pin male SCSI-II connector is provided on this DAQ for all I/O connections. NI PCI-6030E support from AI <0... 15> or PFI0 simulation triggers. The analog output of this model has a successive approximation analog-to-digital converter ADC and a dual-buffered digital-to-analog converter (DAC).

In terms of its analog output characteristics, the PCI-6030E comes with a 2,048-sample size FIFO buffer that can transmit data in three modes: interrupt, programming I/O, and DMA mode. Available DMA modes include decentral-collect, demand transfer, and single transfer. The versatile DAQ supports DC input coupling with a maximum allowable voltage of ±11 V grounded at each input. The overvoltage protection is set to trigger ±25 V trip in the power-on state and ±15 V trip in the power-off state.