PCI-5102  示波器设备 进行高分辨率低噪声测量的时域

PCI-5122 示波器设备

100 MHz带宽，100 MS/s，14位PCI示波器设备—PCI‑5122高分辨率PXI示波器包含两个通道，具有大于75 dBc的无杂散动态范围(SFDR)，并可灵活设置耦合、阻抗、电压范围和滤波。 示波器还具有多个触发模式、高容量板载内存和一个包含数据流和分析函数的仪器驱动程序。 该设备是需要以高达100 MS/s和100 MHz的模拟带宽进行高分辨率低噪声测量的时域和频域应用的理想选择。

National Instruments PCI-5102 数字化仪/示波器

National Instruments PCI-5102（部件号：777304-01）是一款用于PCI的20 MS/s、2通道数字化仪。使用此模型，用户可以以相对较低的成本创建性能更好、自动化速度更快的测试系统。PCI-5102是高速DAQ（数据采集）系统的合适选择。该型号具有 2 个模拟输入通道，每个通道具有 15 MHz 的模拟输入带宽。

该数字化仪支持软件可选衰减，可在 ±50 mV 至 ±5 V 的输入电压范围内工作。此外，用户还可以借助衰减探头将PCI-5102数字化仪的电压范围扩展到±50 V。信号测量能力也可以通过软件可选的交流或直流耦合来提高。该器件配备一对 8 位 20 MS/s 闪存 ADC，可实现输入信号的快速数字化。用户可以利用用户 RIS（随机交错）采样来获得有效采样率高达 1 GS/s 的扩展。该数字化仪具有板载采集存储器，可容纳约 663,000 个样本。数据首先采集到集成的内置存储器中，然后传输到主机个人计算机 （PC） 存储器。该设备使用NI-DMM驱动程序软件运行。

NI PCI-5102 旨在将样本实时传输到主机存储器。该器件具有多个复杂的触发选项，例如迟滞值、可编程触发阈值、双电平触发，以及不仅在输入通道上，而且在专用触发通道上也具有触发延迟。该模型允许用户定义在任何触发事件之前和之后应采集多少样本。此外，还有两个TTL/CMOS数字触发器，用于同步多个仪器。当用户同步多个设备时，有几个优点包括：使用相同的采样时钟对采集多个仪器进行定时，并使用一个触发器触发多个仪器。NI 设备 的 尺寸 为 4.2 x 6.87 英寸。在物理维度上。

PCI-5102  示波器设备 进行高分辨率低噪声测量的时域

PCI-5122 oscilloscope device

100 MHz bandwidth, 100 MS/s, 14-bit PCI oscilloscope device - PCI‑5122 High resolution PXI oscilloscope contains two channels with a spury-free dynamic range (SFDR) of greater than 75 dBc and flexible setting of coupling, impedance, voltage range and filtering. The oscilloscope also has multiple trigger modes, high capacity onboard memory, and an instrument driver that includes data streams and analysis functions. The device is ideal for time - and frequency-domain applications requiring high-resolution, low-noise measurements with analog bandwidths of up to 100 MS/s and 100 MHz.

National Instruments PCI-5102 digitizer/oscilloscope

National Instruments PCI-5102 (Part number: 777304-01) is a 20 MS/s, 2-channel digitizer for PCI. Using this model, users can create better performing and faster automated test systems at a relatively low cost. The PCI-5102 is the right choice for high-speed DAQ (Data Acquisition) systems. This model has 2 analog input channels, each with an analog input bandwidth of 15 MHz.

The digitizer supports software selectable attenuation and operates in the input voltage range from ±50 mV to ±5 V. In addition, the voltage range of the PCI-5102 digitizer can be extended to ±50 V with the help of the attenuation probe. Signal measurement capabilities can also be improved with software-optional AC or DC coupling. The device is equipped with a pair of 8-bit 20 MS/s flash memory ADCs for rapid digitization of input signals. Users can take advantage of user RIS (Random interlaced) sampling to get an effective sampling rate of up to 1 GS/s. The digitizer has an onboard acquisition memory and can hold approximately 663,000 samples. Data is first collected into the integrated internal memory and then transferred to the host personal computer (PC) memory. The device is run using NI-DMM driver software.

The NI PCI-5102 is designed to transfer samples to host memory in real time. The device has several complex trigger options, such as hysteresis values, programmable trigger thresholds, dual-level trigger, and trigger delay not only on the input channel, but also on the dedicated trigger channel. The model allows users to define how many samples should be taken before and after any triggering event. In addition, there are two TTL/CMOS digital triggers for synchronizing multiple instruments. When users synchronize multiple devices, several advantages include timing the acquisition of multiple instruments using the same sampling clock and using a single trigger to trigger multiple instruments. NI devices measure 4.2 x 6.87 inches. In the physical dimension.