PCI-4060  数字万用表设备  可以测量交流和直流参数

National Instruments PCI-4060 5.5 位万用表 （NI 4060）

配置：

 电压：通用 PCI 3.3V 和 5V

部件编号：184636J-01

National Instruments PCI-4060 数字万用表

PCI-4060 是 NI 公司 设计 的 一款 先进 数字 万用表 设备。PCI 4060 数字万用表的部件号为 777559-01。PCI-4060 可以安装在基于 PC 的系统中。数字万用表可以像任何万用表一样读取电压、电阻和电流测量值。此外，该器件还可以执行温度和频率测量。数字万用表还可用于二极管测试，可以测量交流和直流参数。PCI-4060 是一款经济高效的设备。 PCI-4060万用表主要适用于OEM和教育实验室。

PCI-4060 数字万用表可在两种模式下运行：直流测量和交流测量。DC 模式的最大分辨率高达 5.5 位。直流模式的电压范围为+20 mV至+250V。交流电压范围为 20 Vrms 至 250 Vrms。NI PCI-4060 可以 测量 2 线 和 4 线 电阻。在 2 线模式下，范围可在 200 Ω 至 200 MΩ 之间选择。还提供自动量程选项。在 4 线电阻模式下，两对端子都使用。4 线模式消除了引线电阻的影响。此功能使数字万用表能够精确地测量低值电阻。该模式的测量范围为 200 Ω 至 2 MΩ。

PCI-4060 数字万用表也可用于测试二极管。PCI-4060 在二极管测试模式下可测量高达 2 V 的电压。在这种模式下，PCI-4060 激励二极管并测量压降。如果读数为 2.20 VDC，则表明被测二极管有缺陷或反向偏置。万用表的输入电阻为 1 Mohm，带宽为 20 Hz 至 25 kHz。建议预热时间为 30 分钟。

NI 设备尺寸为 4.25 x 6.9 英寸。在物理维度上。它的推荐工作温度范围为 0 至 55 °C，存储温度范围为 -20 至 70 °C，非冷凝相对湿度范围为 10 至 90%。

PCI-4060是一款具有众多优势的视觉软件产品，可实现机器视觉应用，无须编程即可创建、校准并部署一个视觉应用程序，用于自动检测的视觉生成器。

PCI-4060  数字万用表设备  可以测量交流和直流参数

National Instruments PCI-4060 5.5-bit Multimeter (NI 4060)

Settings:

Voltage: Universal PCI 3.3V and 5V

Part number: 184636J-01

National Instruments PCI-4060 digital multimeter

PCI-4060 is an advanced digital multimeter device designed by NI Corporation. The component number of a PCI 4060 digital multimeter is 777559-01. PCI-4060 can be installed in PC-based systems. A digital multimeter can read voltage, resistance, and current measurements just like any multimeter. In addition, the device can perform temperature and frequency measurements. Digital multimeters can also be used for diode testing and can measure AC and DC parameters. The PCI-4060 is a cost-effective device. The PCI-4060 multimeter is mainly suitable for OEM and educational laboratories.

The PCI-4060 digital multimeter operates in two modes: DC measurement and AC measurement. The maximum resolution in DC mode is up to 5.5 bits. The voltage range for DC mode is +20 mV to +250V. The AC voltage ranges from 20 Vrms to 250 Vrms. The NI PCI-4060 can measure 2-wire and 4-wire resistance. In 2-wire mode, the range can be selected between 200 Ω and 200 MΩ. Automatic range options are also available. In 4-wire resistance mode, both pairs of terminals are used. The 4-wire mode eliminates the effect of lead resistance. This feature enables digital multimeters to accurately measure low value resistances. The measurement range of this mode is 200 Ω to 2 MΩ.

The PCI-4060 digital multimeter can also be used to test diodes. The PCI-4060 measures voltages up to 2 V in diode test mode. In this mode, the PCI-4060 excites the diode and measures the voltage drop. A reading of 2.20 VDC indicates that the diode under test is defective or reverse-biased. The multimeter has an input resistance of 1 Mohm and a bandwidth of 20 Hz to 25 kHz. The recommended preheating time is 30 minutes.

The NI device measures 4.25 x 6.9 inches. In the physical dimension. It has a recommended operating temperature range of 0 to 55 °C, a storage temperature range of -20 to 70 °C and a non-condensing relative humidity range of 10 to 90%.

PCI-4060 is a vision software product with many advantages for machine vision applications, creating, calibrating and deploying a vision application without programming for automatic inspection of vision generators.