SCXI-1160 NI 通用继电器开关模块

National lnstruments SCXl-1160通用继电器开关模块

NISCX1-1160(部件号:77657260）通用开关模块具有16个独立的SPDTC型机电闭锁继电器，具有极低的导通电阻和热偏移。该模块的继电

器能够切换、路由和控制中电平信号。SCX1160开关模块的最大开关速率为每秒50次操作，并且完全可通过软件编程。该模块的开关容量在2VRMS时为250A，在2VDC时为30A。NSCXA1160可与NMIO-16板卡一起使用Lab-NB、LabPC、Lab-PC+、Lab-LC和PC-LPM-16板，以及DIO-24、DIO-32F和D10-96板。

该器件的继电器工作时间为10ms，失调电压为3 pV.使用SCX-1160模块的一个优点是可以在一个或多个机箱中使用多个模块，从而能够控制和切换数千个信号。当SCX1160与SCX机箱一起使用时，机箱可以在多种类型的应用中用作控制器或交换机，例如工业过程监控、生产测试和实验室测试。该设备使用N-SWITCH驱动软件运行，该软件与LabVIEW和LabWindows/ CvVI等软件包兼容。

NISCX1-1160继电器开关模块上有1个跳线。首先，跳线W2将上拉电阻连接到背面信号连接器上的SERDATOUT信号。跳战线W3、W4和W160指SCX-1160是要链接到DIO板还是MIO板。如果SCXI5没有连接到背面信号连接器的任何东西，那么这些跳线的布置就无关紧要了。最后，跳线W1在缓冲后将SOX总线MISO线传送到背面信号连接器上的SERDATOUT信号。当继电器触点上存在高电压时，此继电器开关模块无法访问模拟背板，以保护背板免受故障影响。N仪器的尺寸:2.6×8.8x 0.1160 in.

[友情提示]

运输方式和货运方式:

根据不同地区的船运公司。(如果您需要指定运输公司，请联系卖方)

运费、运输价格(不含国家海关手续费等费用)，以卖方实际提供的运费价格为准。在中国境内(包括香港、澳门和台湾)，大部分免费航运。请联系工作人员。付款方式:买家请根据实际情况选择付款方式，如有疑问请联系卖家!!!!!

SCXI-1160 NI 通用继电器开关模块

National lnstruments SCXl-1160 universal relay switch module

The NISCX1-1160(Part number :77657260) universal switch module features 16 individual SPDTC type electromechanical latching relays with extremely low on-resistance and thermal offset. The module is relayed

The device can switch and route

And control medium level signal. The SCX1160 switch module has a maximum switching rate of 50 operations per second and is fully software programmable. The switching capacity of the module is 250A at 2VRMS and 30A at 2VDC. The NSCXA1160 can be used with the NMIO-16 boards Lab-NB, LabPC, Lab-PC+, Lab-LC and PC-LPM-16 boards, as well as DIO-24, DIO-32F and D10-96 boards. The relay operating time of the device is 10ms and the offset voltage is 3 pV.

One advantage of using the SCX-1160 module is that multiple modules can be used in one or more chassis, enabling the ability to control and switch thousands of signals. When the SCX1160 is used with an SCX chassis, the chassis can

In a variety of types of response

Used as a controller or switch, for example in industrial process monitoring, production testing and laboratory testing. The device runs using N-SWITCH driver software, which works with LabVIEW and LabWindows/ CvVI

Such software packages are compatible. There is one jumper on the NISCX1-1160 relay switch module. First, the jumper W2 connects the pull-up resistor to the SERDATOUT signal on the back signal connector. Jumping lines W3, W4, and W160 indicate whether the SCX-1160 is to be linked to the DIO board or the MIO board. If the SCXI5 doesn't have anything attached to the signal connector on the back, then the arrangement of these jumpers doesn't matter. Finally, the jumper W1, after buffering, transmits the SOX bus MISO wire to the SERDATOUT signal on the back signal connector. When there is a high voltage on the relay contact, this relay switch module cannot access the analog backplane to protect it from failure. N Instrument size :2.6×8.8x 0.1160 in.

[Friendly tips]

Mode of transport and freight:

Depending on the shipping company in the region. (If you need to designate a shipping company, please contact the seller)

The freight and transportation price (excluding national customs handling fees and other expenses) shall be subject to the freight price actually provided by the seller. Within China (including Hong Kong, Macau and Taiwan), most shipping is free. Please contact the staff. Payment method: The buyer please choose the payment method according to the actual situation. If in doubt, please contact the seller!!!!!