NI-GPIB-140A NI 光纤GPIB延长器 采用缓冲传输技术

NI GPIB-140A是一款光纤GPIB延长器，可将GPIB系统延长1公里，而不会影响GPIB的完整性或不需要任何软件修改。该设备采用缓冲传输技术，数据传输速率可达1.1 Mb/s (IEEE 488.1)或2.8 Mb/s (HS488)。GPIB-140A 还将系统中GPIB 设备的最大数量从15增加到26。

还有一个GPIB-140A/2延长器，可以将GPIB电缆长度延长至2公里，同时仍保持GPIB的完整性，并且不需要任何软件修改。与GPIB-140A类似，该设备也采用缓冲传输技术，数据传输速率高达1.1 Mb/s (IEEE488.1)或2.8 Mb/s (HS488)。此外，GPIB-140A/2将系统中GPIB设备的最大数量从15个增加到26个。

GPIB-140A延长器使用光缆来延长GPIB系统的长度。要将系统连接到高速GPIB延长器设备，可以使用带有GPIB延长器的光纤电缆来延长系统的电缆长度，而不会牺牲GPIB设备的完整性或改变任何应用程序。带有GPIB 140A扩展器的GPIB T7型可以将系统延长至1公里，而带有一对GPIB 140A/2延长器的GPIB类型T8可以将系统延长至2公里。

NIGPIB-140A/2扩展器可应用于电子测试与仪器仪表、桌面测量与测试、分布式测量与控制、系统工程软件等各个行业。

GPIB-140A4延长器件可以将GPIB系统电缆长度延长到1千米而不会影响(GPBE的完整住,无需修改软件。这款财件采用哦中传输技术传输数据速率可达11Mo (EE-481或28MAMis H1S4)。GPB-140A还可以扩展GPIB系统支持的GPIB设备数量,从最大15个扩大到26个。

NI GPIB-140A是一款GPIB(通用并行接口总线)控制器模块，由NI (NationalInstruments）公司生产。该模块具有以下主要产品功能:

GPIB接口支持:NI GPIB-140A模块提供了标准的GPIB接口，可以连接到各种支持GPIB通信协议的仪器和设备。它支持并行通信，可实现快速和可靠的数据传输。

高速数据传输:该模块支持高速的数据传输，能够在GPIB总线上实现快速的数据读取和写入。这使得它适用于需要高带宽和实时性的应用。

灵活的控制能力:NI GPIB-140A模块具有灵活的控制能力，可用于发送命令、控制参数设置和接收数据等操作。它可以与各种仪器和设备进行通信，并实现对其进行精确控制和监控。

驱动和软件支持: NI GPIB-140A模块配备了相应的驱动程序和软件工具，可与NI的软件平台(如LabVIEW)集成使用。这使得用户可以通过编程方式进行控制和数据处理，实现自动化和定制化的应用。

NI-GPIB-140A NI 光纤GPIB延长器 采用缓冲传输技术

The NI GPIB-140A is a fiber optic GPIB extender that extends a GPIB system by 1 km without compromising the integrity of the GPIB or requiring any software modifications. The device uses buffered transmission technology, and the data transfer rate can reach 1.1 Mb/s (IEEE 488.1) or 2.8 Mb/s (HS488). The GPIB-140A also increases the maximum number of GPIB devices in the system from 15 to 26.

There is also a GPIB-140A/2 extender that can extend the GPIB cable length up to 2 km while still maintaining the integrity of the GPIB and requiring no software modifications. Similar to the GPIB-140A, the device also uses buffered transmission technology with data transfer rates up to 1.1 Mb/s (IEEE488.1) or 2.8 Mb/s (HS488). In addition, the GPIB-140A/2 increases the maximum number of GPIB devices in the system from 15 to 26.

The GPIB-140A extender uses optical cable to extend the length of the GPIB system. To connect a system to a high-speed GPIB extender device, a fiber optic cable with a GPIB extender can be used to extend the cable length of the system without sacrificing the integrity of the GPIB device or altering any applications. The GPIB T7 model with GPIB 140A extenders can extend the system up to 1 km, while the GPIB type T8 with a pair of GPIB 140A/2 extenders can extend the system up to 2 km.

The NIGPIB-140A/2 extender can be used in various industries such as electronic test and instrumentation, desktop measurement and testing, distributed measurement and control, and system engineering software.

The GPIB-140A4 extension device can extend the GPIB system cable length up to 1 km without affecting the integrity of the GPBE, without software modification. This gadget uses Oh-medium transmission technology to transmit data rates up to 11Mo (EE-481 or 28MAMis H1S4). The GPB-140A also expands the number of GPIB devices supported by the GPIB system from a maximum of 15 to 26.

The NI GPIB-140A is a GPIB(Universal Parallel Interface Bus) controller module manufactured by NI (NationalInstruments). The module has the following main product features:

GPIB Interface support: The NI GPIB-140A module provides a standard GPIB interface that can be connected to a variety of instruments and devices that support the GPIB communication protocol. It supports parallel communication for fast and reliable data transmission.

High-speed data transmission: The module supports high-speed data transmission and can achieve fast data reading and writing on the GPIB bus. This makes it suitable for applications that require high bandwidth and real-time performance.

Flexible control: The NI GPIB-140A module has flexible control capabilities, which can be used to send commands, control parameter Settings, and receive data. It can communicate with various instruments and equipment, and achieve accurate control and monitoring.

Driver and Software support: The NI GPIB-140A module is equipped with appropriate drivers and software tools for integration with NI's software platforms such as LabVIEW. This allows users to control and process data programmatically, enabling automated and customized applications.