PXI-5691 射频放大器

PXI-5691

射频放大器

本文档列出了PXI-5691射频放大器的技术指标。

在以下条件下保证规格:

10分钟热身时间

校准周期保持机箱风扇转速设置为HighPXI-5690仪器驱动使用

PXI-5690仪表驱动程序在仪表温度不稳定后进行自校准

除非另有说明，规格描述了在0℃至55℃环境温度范围内保证的、可追溯的产品性能。

PXI-5691典型值描述的是超出保修范围之外的有用产品性能，不包括测量不确定度或漂移的保护带。可能不会对从工厂发货的所有单元验证典型值。除非另有说明，典型值涵盖了设备在23°C土5°C环境温度范围内的预期性能，基于开发生产期间进行的测量，置信度为90%。

PXI-5691标称值(或补充信息)描述了产品可能有用的附加信息，包括规格值或典型值未涵盖的预期性能。标称值不在保修范围内。

规格如有更改，恕不另行通知。有关最新的pxi -5691规格，请访问ni.com/manuals。

美国国家仪器公司的射频设备能够在常见的医疗植入式通信系统(MICS)频段内产生和/或获取准确的信号。NI射频器件在制造过程中进行了许多测量测试和验证。更多的

有关射频器件应用的信息，

PXI-5691 射频放大器

PXI-5691

Radio-frequency amplifier

This document lists the technical specifications of the PXI-5691 RF amplifier.

Specifications are guaranteed under the following conditions:

10 minutes warm-up time

Calibration period Keep the chassis fan speed set to HighPXI-5690 for instrument drive use

PXI-5690 meter driver self-calibrates after meter temperature instability

Unless otherwise stated, the specification describes guaranteed, traceable product performance over an ambient temperature range of 0 ° C to 55 ° C.

PXI-5691 Typical values describe useful product performance beyond warranty coverage and do not include protective bands that measure uncertainty or drift. Typical values may not be verified for all units shipped from the factory. Unless otherwise stated, typical values cover the expected performance of the equipment in the 5°C ambient temperature range of 23°C soil and are based on measurements taken during development production with a 90% confidence level.

The PXI-5691 Nominal values (or Supplementary information) describe additional information about the product that may be useful, including expected performance not covered by specification values or typical values. The nominal value is not covered by the warranty.

Specifications are subject to change without notice. For the latest pxi-5691 specifications, please visit ni.com/manuals.

National Instruments' RF equipment generates and/or acquires accurate signals within the frequency bands commonly used in medical implantable communication systems (MICS). NI RF devices undergo many measurement tests and validations during the manufacturing process.