MVME420 Motorola 接口适配器模块  处理器

艾默生/摩托罗拉 MVME420 SASI 总线外设接口适配器模块

此摩托罗拉 MVME420 SASI 总线外设接口适配器模块已使用且状况良好。

产品编号： 01W3129B01

MVME420是摩托罗拉公司推出的一款工控机，基于PowerPC架构，采用摩托罗拉MPC860T处理器，具有高性能、低功耗、高集成度等特点。

MVME420主要应用于工业控制领域，采用摩托罗拉公司开发的MVME系列处理器，具有高性能、低功耗、高可靠性等特点，适用于各种工业控制领域。它具有多种接口，如以太网、串口、USB等，方便与外部设备连接。此外，MVME420还具有可扩展性，可以与其他模块进行组合，构成完整的控制系统。

在MVME420的参数中，核心频率为706MHz，DirectX版本为11，功耗TDP为38W，内存频率为1782MHz。

接口适配器模块是一种用于连接不同接口的硬件设备，以便它们能够相互通信和交换数据。它通常用于在两个具有不同接口标准的设备之间建立连接。

MVME420接口适配器模块通常具有以下功能：

转换接口标准：它可以将一种接口标准转换为另一种接口标准，以便两个不同的设备可以相互通信。

数据传输：MVME420它可以在两个设备之间传输数据，包括串行数据和并行数据。

缓冲存储：它可以在两个设备之间提供缓冲存储，以减轻数据传输的瓶颈问题。

控制信号：它可以在两个设备之间传递控制信号，以便一个设备可以控制另一个设备的操作。

诊断和维护：MVME420它还可以提供诊断和维护功能，以便用户可以检查接口适配器的状态和故障排除。

总之，MVME420接口适配器模块是一种用于连接不同接口设备的硬件设备，它可以实现数据传输、转换接口标准、缓冲存储、控制信号传递和诊断维护等功能。

MVME420 Motorola 接口适配器模块  处理器

Emerson/MOTOROLA MVME420 SASI bus peripheral interface adapter module

This MOTOROLA MVME420 SASI bus peripheral interface adapter module is used and in good condition.

Product Number: 01W3129B01

MVME420 is an industrial computer launched by MOTOROLA, based on PowerPC architecture, using MOTOROLA MPC860T processor, with high performance, low power consumption, high integration and other characteristics.

MVME420 is mainly used in the field of industrial control, using the MVME series processor developed by MOTOROLA, with high performance, low power consumption, high reliability and other characteristics, suitable for various industrial control fields. It has a variety of interfaces, such as Ethernet, serial port, USB, etc., to facilitate the connection with external devices. In addition, the MVME420 is scalable and can be combined with other modules to form a complete control system.

In the parameters of the MVME420, the core frequency is 706MHz, the DirectX version is 11, the power consumption TDP is 38W, and the memory frequency is 1782MHz.

An interface adapter module is a hardware device used to connect different interfaces so that they can communicate with each other and exchange data. It is commonly used to establish a connection between two devices with different interface standards.

The MVME420 interface adapter module typically has the following functions:

Conversion interface standard: It can convert one interface standard to another so that two different devices can communicate with each other.

Data transfer: MVME420 It can transfer data between two devices, including serial data and parallel data.

Buffered storage: It can provide buffered storage between two devices to alleviate bottlenecks in data transfer.

Control signals: It can pass control signals between two devices so that one device can control the operation of the other.

Diagnosis and maintenance: MVME420 It can also provide diagnostic and maintenance functions so that users can check the status of the interface adapter and troubleshoot.

In short, MVME420 interface adapter module is a hardware device used to connect different interface devices, it can achieve data transmission, conversion interface standards, buffer storage, control signal transmission and diagnostic maintenance and other functions.