MVME188A  |  内存模块  |    MD2202-D32-X-P  |     MVME162PA-344

型号：MVME188A

类别：内存模块

工作电压: 24V

功耗 :3W

频率范围 :50-60Hz

工作温度范围 :-20至60摄氏度

配置：

• 带 2 个串行端口的

SYSCON 模块 • 2 个 32 MB 内存模块

• 安装了 10 个摩托罗拉 XC88200RB25 25 MHz 处理器的 CPU 模块

特征：

VMEmodule 板组上的多个 RISC MPU/DRAM 选项

（1） 至 （4） MC88100 25 MHz 的 RISC 微处理器

32KB - 512KB 高速缓存，位于 （2）、（4） 或 （8） MC88200或MC88204高速缓存/内存管理单元 （CMMU） 中

2KB 非易失性配置存储

摩托罗拉 MVME188A 系列 VME 单板计算机有多种型号。基本MVME188A仅包括系统控制器 （SYSCON） 板和 25 MHz 主逻辑 （CPU） 板。如果不添加一个、两个、三个或四个内存板，它将无法工作;以及一个包含RISC芯片的HYPERmodule夹层模块。

MVME188A的增强功能（在MVME188上）包括单周期刷新以最大限度地降低 VCC 噪声、增加板载旁路电容以及高速时钟线的板载屏蔽。此外，MVME188A还增强了正交数据/地址线布局，以减少串扰，并从CMOS更改为TTL驱动器，以减少过冲/下冲。

MVME188A提供改进的RESET功能。它在非系统控制器且内存映射在 $0 以外的位置的MVME188A板上执行完整的系统复位。也不允许监督模式和用户模式访问。

Model: MVME188A

Category: Memory module

Working voltage: 24V

Power consumption :3W

Frequency range :50-60Hz

Operating temperature range :-20 to 60 degrees Celsius

Settings:

• With 2 serial ports

SYSCON modules • 2 32 MB memory modules

10 CPU modules with MOTOROLA XC88200RB25 25 MHz processor are installed

Features:

Multiple RISC MPU/DRAM options on the VMEmodule board group

(1) to (4) MC88100 25 MHz RISC microprocessor

32KB-512KB cache, located in (2), (4), or (8) MC88200 or MC88204 Cache/memory management unit (CMMU)

2KB of non-volatile configuration storage

The MOTOROLA MVME188A series of VME single-board computers are available in a variety of models. The basic MVME188A consists only of a system controller (SYSCON) board and a 25 MHz main logic (CPU) board. It won't work without adding one, two, three, or four memory boards; And a HYPERmodule mezzanine containing a RISC chip.

Enhancements to the MVME188A (on the MVME188) include a single-cycle refresh to minimize VCC noise, increased on-board bypass capacitance, and on-board shielding for high-speed clock lines. In addition, the MVME188A has enhanced the orthogonal data/address line layout to reduce cross talk and changed from CMOS to TTL drivers to reduce overshoot/downshoot.

The MVME188A offers an improved RESET function. It performs a full system reset on an MVME188A board that is not a system controller and whose memory map is outside of $0. Supervisory mode and user mode access are also not allowed.