Woodward 8237-1604  超速安全装置 可以有效地避免机械超速带来的严重事故

protect - gii是一种，设计用于在检测到超速或超速事件时安全关闭各种尺寸的蒸汽、天然气和水力涡轮机。

8237-1600可以配置与任何尺寸的涡轮机工作，只要它是由蒸汽，气体或水提供动力。这个超加速装置的速度读数在4到20毫安之间。这个模型将安全关闭任何大小的涡轮机，如果它开始危险地加速。面板安装有一个背板结构，使维修和更换容易。型号8237-1600可以很容易地集成到任何涡轮系统，它配备了Modbus通信。除了加速检测外，它还配备了MPU检测。本产品的涂层使其耐硫污染，可用于3C2类环境。具有IEC 721-3-3 1994国际标准。

Woodward 8237-1604 超速安全装置是一种防止机械超速的安全保护设备，通常安装在动力机械上，如发动机、升降设备等。当这些机械的转速超过预定限值时，超速安全装置会自动动作，切断输入工质（如燃料或蒸汽），使机械立即停车，以避免发生严重事故。

Woodward 8237-1604 超速安全装置有多种形式，如超速报警器、限速器、危急遮断器等。这些装置通常由传感器、控制单元和执行机构组成。传感器用于监测机械的转速，当转速超过预定限值时，传感器将信号传递给控制单元，控制单元根据预设的逻辑进行判断和处理，然后输出控制信号给执行机构，执行机构根据控制信号采取相应的动作，如切断输入工质、触发报警等。

Woodward 8237-1604 超速安全装置在多种领域中都有应用，如工业自动化、航空航天、交通运输等。例如，在电梯中安装超速安全装置，当电梯的运行速度超过额定速度时，装置会自动触发制动器，使电梯迅速停止运行，保障乘客的安全。在航空发动机中，超速安全装置可以防止发动机的转速过高，避免发生飞车事故。

总之，超速安全装置是一种重要的安全保护设备，可以有效地避免机械超速带来的严重事故，保障人们的生命财产安全。

Woodward 8237-1604  超速安全装置 可以有效地避免机械超速带来的严重事故

The protect-gii is designed to safely shut down steam, natural gas and hydro turbines of all sizes when an overspeed or overspeed event is detected.

Models 8237-1600 can be configured to work with any size turbine, as long as it is powered by steam, gas or water. This superaccelerator has a speed reading between 4 and 20 mah. This model will safely shut down a turbine of any size if it starts to accelerate dangerously. The panel is mounted with a backplane structure that makes servicing and replacement easy. Model 8237-1600 can be easily integrated into any turbine system, it is equipped with Modbus communication. In addition to accelerated detection, it is also equipped with MPU detection. The coating of this product makes it resistant to sulfur pollution and can be used in class 3C2 environments. It has IEC 721-3-3 1994 international standard.

Woodward 8237-1604 overspeed safety device is a safety protection device to prevent mechanical overspeed, usually installed on power machinery, such as engines, lifting equipment, etc. When the speed of these machines exceeds the predetermined limit, the overspeed safety device automatically acts to cut off the input working medium (such as fuel or steam) and stop the machine immediately to avoid serious accidents.

Woodward 8237-1604 Speed safety devices are available in various forms, such as speed alarms, speed limiters, emergency breakers, etc. These devices usually consist of sensors, control units and actuators. The sensor is used to monitor the speed of the machine, when the speed exceeds the predetermined limit, the sensor transmits the signal to the control unit, the control unit judges and processes according to the preset logic, and then outputs the control signal to the actuator, the actuator takes the corresponding action according to the control signal, such as cutting off the input working medium, triggering the alarm, etc.

Woodward 8237-1604 Speed safety devices are used in a variety of fields, such as industrial automation, aerospace, transportation and so on. For example, the installation of an overspeed safety device in the elevator, when the operating speed of the elevator exceeds the rated speed, the device will automatically trigger the brake, so that the elevator quickly stops running, to ensure the safety of passengers. In aero engines, overspeed safety devices can prevent the engine speed from being too high to avoid car accidents.

In short, the speeding safety device is an important safety protection equipment, which can effectively avoid serious accidents caused by mechanical speeding and ensure the safety of people's lives and property.