步进驱动器 6410-001-C-N-N  它接受来自控制器的信号

6410 步进驱动器

这些模块化、高性能的微步进驱动器支持广泛的要求。这些变频器为低压直流输入供电应用提供了卓越的价值。6410 型号具有步进和方向输入，输出电流可在 0.625 至 5 安培 RMS 范围内调节，带 3 位 DIP 开关。

特征

单电源输入

输入电压范围为 24 至 75 VDC，适用于各种电源

输出电流可在 0.625 至 5 安培 RMS 范围内调节，带 3 位 DIP 开关

4 相双极斩波器驱动器，可实现出色的电流调节和低纹波电流

可通过 DIP 开关选择微步进分辨率，每转最高可达 51,200 步

在许多应用中，空闲电流降低可减少电机发热

可选的步进滤波器可抑制步进输入上的噪声

故障保护：

线对线和线对中性短裤

内部电源欠压

总线过电压

紧凑的尺寸

科尔摩根 / Pacific Scientific 6410-001-C-N-N 微步进驱动模块

配置： 001：无定制 C：盖 N：无散热器 N：

无连接器套件

本机标记为

6410-001-N-N-N，但包括可选盖板。

步进驱动器是一种电子设备，用于控制步进电机的运动。它接受来自控制器的信号，并将其转换为适当的电流和电压来驱动电机。

6410-001-N-N-N步进驱动器通常包括一个驱动电路和一个控制电路。驱动电路用于提供电机所需的电流和电压，而控制电路则用于控制电机的速度、方向和位置。

步进驱动器的主要特点包括：

1. 高精度：6410-001-N-N-N能够精确控制电机的位置和速度。

2. 高效率：能够提供高效率的驱动，减少能量浪费。

3. 多功能：6410-001-N-N-N能够支持多种不同类型的电机和控制信号。

4. 可靠性高：能够在恶劣的环境下工作，并具有良好的抗干扰能力。

步进驱动器广泛应用于各种自动化设备，如机器人、CNC 机床、印刷机、包装机等。

步进驱动器 6410-001-C-N-N  它接受来自控制器的信号

6410 step drive

These modular, high-performance microstepper drivers support a wide range of requirements. These converters offer exceptional value for low-voltage DC input power applications. The 6410 model has step and directional inputs, and the output current can be adjusted in the RMS range of 0.625 to 5 amps with a 3-position DIP switch.

trait

Single power input

Input voltage ranges from 24 to 75 VDC for a variety of power supplies

The output current can be adjusted in the RMS range from 0.625 to 5 amps with a 3-position DIP switch

4-phase bipolar chopper driver for excellent current regulation and low ripple current

Microstep resolution can be selected via DIP switch up to 51,200 steps per turn

In many applications, the reduction of idle current can reduce motor heating

An optional step filter suppresses noise on the step input

Failure protection:

Line-to-line and line-to-line unisex shorts

Internal power supply undervoltage

Bus overvoltage

Compact size

Kollmorgen/Pacific Scientific 6410-001-C-N-N microstepper drive module

Configuration: 001: No custom C: Cover N: no radiator N:

Connectionless kit

Natively marked as

6410-001-N-N-N, but includes optional cover plate.

A stepper driver is an electronic device used to control the movement of a stepper motor. It accepts the signal from the controller and converts it into the appropriate current and voltage to drive the motor.

The 6410-001-N-N-N stepper driver usually includes a drive circuit and a control circuit. The drive circuit is used to provide the current and voltage required by the motor, while the control circuit is used to control the speed, direction and position of the motor.

The main features of the stepper drive include:

1. High precision: 6410-001-N-N-N can precisely control the position and speed of the motor.

2. High efficiency: can provide high efficiency drive, reduce energy waste.

3. Multi-function: 6410-001-N-N-N can support a variety of different types of motors and control signals.

4. High reliability: can work in harsh environments, and has good anti-interference ability.

Stepper drivers are widely used in various automation equipment, such as robots, CNC machines, printing presses, packaging machines, etc.