T8480  |    T8403CX    |   T8461C  | 模拟输出模块

型号：T8480

类别：模拟输出模块

成色：全新，非全新

库存：有

质保：365天

品牌：ICS TRIPLEX

重量：约0.5kg

ICS TRIPLEX 的主要技术参数如下：

输入电压范围：DC 24V

输出电压范围：DC 24V

工作温度范围：-20℃~+70℃

存储温度范围：-40℃~+85℃

湿度范围：10%~90%RH

尺寸：112mm×70mm×123mm

重量：约0.5kg

特性

·每个模块40个三模冗余(TMR)输出通道

全面、自动诊断和自检。

·自动逐点监测线路，检测开路和短路现场接线和负载故障。

2500V耐脉冲光/电隔离屏障。

·自动过流保护(每通道)，无需外部熔断器。

·板载事件序列(SOE)报告，分辨率为1ms。

通过专用的Companion(邻)Slot或SmartSlot(多模块一个备用槽位)配置，支持在线热替换模块.

·前面板输出状态每个点的发光二极管(led)指示输出状态和现场接线故障。

前面板模块状态led指示模块运行状况和运行模式(Active、Standby、connected)。

TVV认证的非干扰应用，请参阅安全手册T8094。

·输出以8个孤立组供电。每一个这样的组都是一个权力组(PG)。

Model: T8480

Category: Analog output module

Finish: New, not new

Stock: Yes

Warranty: 365 days

Brand: ICS TRIPLEX

Weight: About 0.5kg

The main technical parameters of ICS TRIPLEX are as follows:

Input voltage range: DC 24V

Output voltage range: DC 24V

Operating temperature range: -20℃~+70℃

Storage temperature range: -40 ° C to +85 ° C

Humidity range: 10%-90%RH

Size: 112mm×70mm×123mm

Weight: About 0.5kg

peculiarity

· 40 three-mode redundant (TMR) output channels per module

Comprehensive, automated diagnostics and self-tests.

· Automatic point-by-point line monitoring to detect open and short circuit field wiring and load faults.

2500V pulsed optical/electrical isolation barrier.

· Automatic overcurrent protection (per channel) without external fuses.

On-board Event sequence (SOE) reports with a resolution of 1ms.

Online hot replacement modules are supported through a dedicated Companion(adjacent)Slot or SmartSlot(one standby slot for multiple modules) configuration.

· Front panel output status Light emitting diodes (leds) at each point indicate output status and field wiring faults.

The front panel module status led indicates the module health and operating mode (Active, Standby, connected).

For TVV certified non-interference applications, please refer to the Safety manual T8094.

· The output is powered by 8 isolated groups. Each of these groups is a power group (PG).