IS200TSVOH1B  终端板  接受来自两个伺服电流源的输入

产品描述

IS200TSVOH1B是AX Control公司提供的几种TSVO终端板之一。通用电气公司的Mark VI系统中使用了这些伺服阀终端板。Mark VI是用于管理工业气体和蒸汽轮机系统的更先进的Speedtronic系统之一;它已经使用了20多年。

IS200TSVOH1B采用阻隔式端子排。这些都安装在一个长板的一边。电路板能够通过这两个I/O通道接受来自两个伺服电流源的输入。每个端子块允许多达三个LVDT或LVDR反馈传感器附件(总共六个为板)。这些传感器可以是高选择、中值选择或低选择。脉冲率输入在2-14 kHz之间。如果您需要具有这些设置但使用Box类型终端的板，请参阅我们的DSVO板列表。

IS200TSVOH1B输入端子板的安装步骤可能因端子板的型号和类型而有所不同，但一般包括以下步骤：

1. 准备安装工具：如螺丝刀、钳子等。

2. 确定端子板的安装位置：通常选择方便操作和维护的位置。

3. 拆卸端子板的保护盖：如果端子板有保护盖，需要先拆卸。

4. 连接端子板：将端子板的输入端子与外部设备的输出端子相连，并确保连接牢固。

5. 安装端子板：IS200TSVOH1B将端子板安装到预定位置，并用螺丝固定。

6. 检查连接：检查端子板的输入端子是否与外部设备的输出端子正确连接，确保连接牢固。

7. 安装完成：完成安装后，盖上端子板的保护盖，以保护端子板。

需要注意的是，在安装输入端子板时，应该确保端子板的安装位置正确，连接牢固，以保证端子板的正常工作。同时，在安装过程中，应该注意安全，避免损坏端子板或其他设备。

  IS200TSVOH1B  终端板  接受来自两个伺服电流源的输入

Product description

The IS200TSVOH1B is one of several TSVO terminal boards offered by AX Control. These servo valve terminal boards are used in the General Electric Mark VI system. The Mark VI is one of the more advanced Speedtronic systems for managing industrial gas and steam turbine systems; It has been in use for more than 20 years.

IS200TSVOH1B adopts block terminal block. These are mounted on one side of a longboard. The board is able to accept input from two servo current sources through these two I/O channels. Each terminal block allows up to three LVDT or LVDR feedback sensor attachments (a total of six for boards). These sensors can be high selection, median selection, or low selection. Pulse rate input is between 2-14 kHz. If you need a board that has these Settings but uses a Box-type terminal, see our list of DSVO boards.

The procedure for installing the IS200TSVOH1B input terminal board may vary depending on the model and type of the terminal board, but generally includes the following steps:

1. Prepare installation tools, such as screwdrivers and pliers.

2. Determine the installation position of the terminal board. The installation position is convenient for operation and maintenance.

3. Remove the protective cover of the terminal board. If the terminal board has a protective cover, remove it first.

4. Connect the terminal board: Connect the input terminal of the terminal board to the output terminal of a peripheral device, and ensure that the connection is secure.

5. Install the terminal board: IS200TSVOH1B Install the terminal board to the preset position and secure it using screws.

6. Check connections: Ensure that the input terminal of the terminal board is properly connected to the output terminal of the external device.

7. Installation complete: After the installation, cover the protection cover of the terminal board to protect the terminal board.

When installing the input terminal board, ensure that the terminal board is correctly installed and securely connected to ensure the normal operation of the terminal board. During the installation, pay attention to safety to avoid damaging the terminal board or other devices.