IS200EMIOH1A   I/O板  接收或发出信号的装置

   激振器主I/O板部分IS200EMIOH1A来自EX2100系列。该板管理来自其他几个终端板的I/O，并具有PT和CT信号。其中一个主要功能是通过背板发送门脉冲信号到ESEL，然后到EGPA。

IS200EMIOH1A   I/O板是接收或发出信号的装置。ABB机器人常见的I/O板有DSQC651、DSQC652等。以DSQC651板为例，其上方左右两部分分别为X1数字量输出信号端子（8个），X6模拟量输出信号端子（2个）（do接口）；板子下方只有1排X3接口端子共计8个数字量输入信号（di接口）；板子左侧一排为X5接口端子（Device Net接口端子）。

如需更多信息，可阅读机电类书籍或请教专业人士。

关于IS200EMIOH1A的常见问题

如果EX2100控制器在单工系统模式下使用，IS200EMIOH1A将做什么?

如果EX2100控制器在单工模式下工作，那么电压信号将通过J305连接器发送。一旦信号通过J305连接器发送，它们将被发送到M1控制器中的EMIO板。

IS200EMIOH1A板控制场闪继电器。IS200EMIOH1A板控制哪些场闪烁继电器以及如何控制?

IS200EMIOH1A板控制53A和53A场闪烁继电器，该功能是通过EMIO板上的驱动程序完成的。

IS200EMIOH1A型号连接到EBKP背板的哪些部分?

IS200EMIOH1A板连接到C段以及M1和M2控制器。

IS200EMIOH1A   I/O板  接收或发出信号的装置

The main I/O board part IS200EMIOH1A is from the EX2100 series. The board manages I/O from several other end boards and has PT and CT signals. One of the main functions is to send a gate pulse signal through the backplane to the ESEL and then to the EGPA.

The IS200EMIOH1A I/O board is a device that receives or sends signals. The common I/O boards of ABB robots are DSQC651, DSQC652 and so on. Take DSQC651 board as an example, the upper and left parts are X1 digital output signal terminals (8), X6 analog output signal terminals (2) (do interface); There are only 1 row of X3 interface terminals below the board, a total of 8 digital input signals (di interface); The row on the left of the board is Device Net interface terminal (X5 interface terminal).

For more information, read electromechanical books or consult a professional.

FAQ about IS200EMIOH1A

If the EX2100 controller is used in simplex system mode, what will the IS200EMIOH1A do?

If the EX2100 controller is operating in simplex mode, then the voltage signal will be sent through the J305 connector. Once the signals are sent through the J305 connector, they are sent to the EMIO board in the M1 controller.

IS200EMIOH1A board control field flash relay. Which field flicker relays are controlled by the IS200EMIOH1A board and how?

The IS200EMIOH1A board controls the 53A and 53A field flicker relays, this function is done through the driver on the EMIO board.

To which parts of the EBKP backplane does the IS200EMIOH1A model connect?

The IS200EMIOH1A board is connected to segment C and the M1 and M2 controllers.