IS200EACFG2A  变压器  支持1个三相输入电压

IS200EACFG2A是IS200EACFG型号的第二种型号。版本G2板上有4个变压器，支持1个三相输入电压。变压器块为T3、T4、T1、T2;端子排T3位于最靠近字母数字目录的电路板顶部，T4和T1位于电路板中间，端子排T2最靠近电路板底部，最靠近TB4线圈输入端子。该模块G2版本的电压测量范围可达1000vrms。

IS200EACFG2A   当将线圈电缆连接到IS200EACFG2A型号的TB4端子时，第一个和最高的线圈将连接到端子1，同一线圈的最低部分连接到端子2。端子3和端子4为线圈2，线圈2的最高部分连接到端子3，最低部分连接到端子4。

IS200EACFG2A   变压器是一种用于改变交流电压的电气设备。它的基本原理是利用电磁感应原理，通过两个或多个线圈之间的磁耦合来实现电压的变换。

变压器通常由一个铁芯和两个或多个线圈组成。铁芯由高导磁材料制成，用于提供磁路。线圈绕在铁芯上，一个线圈称为初级线圈，另一个线圈称为次级线圈。当交流电流通过初级线圈时，会在铁芯中产生磁场，这个磁场的变化会在次级线圈中感应出电压。

IS200EACFG2A   变压器的主要作用是将输入的高电压变换为输出的低电压，或将输入的低电压变换为输出的高电压。它可以用于电力传输、电力分配、电子设备的电源等领域。

变压器的种类很多，根据用途和结构的不同，可以分为电力变压器、自耦变压器、隔离变压器、调压变压器等。

总之，变压器是一种用于改变交流电压的电气设备，它利用电磁感应原理通过两个或多个线圈之间的磁耦合来实现电压的变换，广泛应用于电力传输、电力分配、电子设备的电源等领域。

IS200EACFG2A  变压器  支持1个三相输入电压

The IS200EACFG2A is the second model of the IS200EACFG model. Version G2 has four transformers on the board and supports one three-phase input voltage. The transformer block is T3, T4, T1, T2; Terminal block T3 is located on the top of the board closest to the alphanumeric catalog, T4 and T1 are located in the middle of the board, and terminal block T2 is closest to the bottom of the board and closest to the TB4 coil input terminals. The G2 version of the module has a voltage measurement range of up to 1000vrms.

When connecting a coil cable to an IS200EACFG2A model TB4 terminal, the first and tallest coil will be connected to terminal 1, and the lowest part of the same coil will be connected to terminal 2. Terminals 3 and 4 are coil 2, with the highest part of coil 2 connected to terminal 3 and the lowest part connected to terminal 4.

A transformer is an electrical device used to change alternating current voltage. Its basic principle is to use the principle of electromagnetic induction to realize the transformation of voltage through the magnetic coupling between two or more coils.

A transformer usually consists of an iron core and two or more coils. The iron core is made of a highly permeable material and is used to provide the magnetic circuit. Coils are wound around the iron core, one coil is called the primary coil and the other is called the secondary coil. When an alternating current passes through the primary coil, it creates a magnetic field in the core, and this change in the magnetic field induces a voltage in the secondary coil.

The main function of the transformer is to convert the high voltage of the input into the low voltage of the output, or to convert the low voltage of the input into the high voltage of the output. It can be used in power transmission, power distribution, power supply for electronic equipment and other fields.

There are many kinds of transformers, according to the different uses and structures, can be divided into power transformers, autotransformers, isolation transformers, voltage regulation transformers and so on.

In short, the transformer is a kind of electrical equipment used to change the AC voltage, it uses the principle of electromagnetic induction through the magnetic coupling between two or more coils to achieve the transformation of voltage, widely used in power transmission, power distribution, electronic equipment power supply and other fields.