IC695CMM002  串行通信模块 用于实现串行通信的电子组件或设备

描述:IC695CMM002是PACSystem RX3i串行通信模块，以前由GE智能平台(GE IP)生产，现在属于艾默生自动化。该模块带有两个(2)独立的RJ-45串行端口，支持RS-232或RS-485/22通信，可配置4线(全双工)或2线(半双工)操作。该模块在CPU背板中最多允许有六(6)个实例。该模块的每个端口都可配置为MODBUS Master, MODBUS Slave, CCM Slave, DNP3 Master, DNP3 Slave或串行I/O协议，并具有500 VDC，连续和710 VDC, 1分钟隔离等级。

IC695CMM002  串行通信模块是一种用于实现串行通信的电子组件或设备。它允许两个或多个设备之间通过串行接口进行数据传输。

IC695CMM002  串行通信模块通常包括一个或多个串行接口，例如 UART（通用异步接收器/发送器）、SPI（串行外设接口）、I2C（内部集成电路）等。这些接口用于在设备之间传输数据，它们使用特定的通信协议和数据格式进行数据传输。

IC695CMM002  串行通信模块通常由微控制器、接口芯片、电平转换器、晶振等组件组成。它可以通过编程实现各种串行通信功能，例如数据发送、数据接收、奇偶校验、数据传输速率设置等。

在实际应用中，串行通信模块广泛应用于各种电子设备中，例如计算机、嵌入式系统、工业控制设备、通信设备等。它们可以用于实现设备之间的数据传输、控制命令传输、传感器数据采集等功能。

总之，IC695CMM002 串行通信模块是一种用于实现串行通信的重要组件，它为设备之间的数据传输提供了可靠的手段。

IC695CMM002  串行通信模块 用于实现串行通信的电子组件或设备

Description: The IC695CMM002 is a PACSystem RX3i serial communication module formerly manufactured by GE Intelligent Platforms (GE IP) and now owned by Emerson Automation. The module comes with two (2) independent RJ-45 serial ports that support RS-232 or RS-485/22 communication and can be configured for 4-wire (full-duplex) or 2-wire (half-duplex) operation. This module is allowed to have a maximum of six (6) instances in the CPU backplane. Each port of the module can be configured for MODBUS Master, MODBUS Slave, CCM Slave, DNP3 Master, DNP3 Slave or serial I/O protocols and has 500 VDC, continuous and 710 VDC, 1-minute isolation levels.

The IC695CMM002 serial communication module is an electronic component or device used to implement serial communication. It allows data transmission between two or more devices via a serial interface.

The IC695CMM002 serial communication module usually includes one or more serial interfaces, such as UART (universal asynchronous receiver/transmitter), SPI (serial peripheral interface), I2C (internal integrated circuit), etc. These interfaces are used to transfer data between devices, and they use specific communication protocols and data formats for data transfer.

IC695CMM002 serial communication module is usually composed of microcontroller, interface chip, level converter, crystal oscillator and other components. It can be programmed to implement various serial communication functions, such as data sending, data receiving, parity check, data transmission rate setting, etc.

In practical applications, serial communication modules are widely used in various electronic equipment, such as computers, embedded systems, industrial control equipment, communication equipment and so on. They can be used for data transmission between devices, control command transmission, sensor data acquisition and other functions.

In short, IC695CMM002 serial communication module is an important component for serial communication, which provides a reliable means for data transmission between devices.