电路板 DS200TCDAH1BJE  具有 8 个跳线

GE Digital I/O 板DS200TCDAH1BJE具有 8 个跳线、板侧面的 1 个 LED 和 2 个 3 针连接器。它还包含 1 个 10 个 LED 和 2 个 50 针连接器。该数字 I/O 板是通用电气 Mark V Speedtronic 涡轮机控制系统的一部分。

电路板侧面 LED 的 ID 为 CR9。点亮时呈绿色，表示电路板正在通电。当 LED 闪烁时，表示电路板上正在进行处理。当 LED 不亮时，表示电路板未通电或对电压没有响应。当板安装在机架机柜中的其他板之间时，LED 可见。您可以从机架柜中的窗口查看 LED。

DS200TCDAH1BJE通过板上的 50 针连接器连接到DS200DTBA和DS200DTBB板。50 针连接器的 ID 是 JQ 和 JR。 50 针带状电缆穿过驱动器内部，并在板之间提供连接。电缆布线很重要，因为它限制了驱动器中其他电缆对信号的干扰。

DS200TCDAH1BJE的GE汽轮机控制系统的优点有：

操作简单。DS200TCDAH1BJE具有出色TFT/LED显示颜色和多协议连接性的触摸屏面板，操作简单。

高效。DS200TCDAH1BJE采用PLC通过步进驱动器来控制步进电机的运转，从而达到了PLC在步进电动控制中应用更加广泛。

灵活。DS200TCDAH1BJE支持单双轴运动控制，可通过控制面板设定移动距离、速度和方向等参数。

稳定。DS200TCDAH1BJEPLC读入设定值后，通过运算产生脉冲、方向信号，控制步进电动机驱动，达到对距离、速度、方向控制的目的，稳定可靠。

电路板 DS200TCDAH1BJE  具有 8 个跳线

The GE Digital I/O board DS200TCDAH1BJE features 8 jumpers, 1 LED on the side of the board, and 2 3-pin connectors. It also contains 1 10-LED and 2 50-pin connectors. The digital I/O board is part of GE's Mark V Speedtronic turbine control system.

The ID of the LED on the side of the board is CR9. When lit, it is green, indicating that the circuit board is being powered on. When the LED flashes, it indicates that processing is taking place on the board. When the LED is not bright, it means that the circuit board is not powered or does not respond to the voltage. The LED is visible when the board is mounted between other boards in the rack cabinet. You can view the LED from the window in the rack cabinet.

The DS200TCDAH1BJE is connected to the DS200DTBA and DS200DTBB boards via a 50-pin connector on the board. The ID of the 50-pin connector is JQ and JR. A 50-pin ribbon cable runs through the inside of the driver and provides a connection between the boards. Cable routing is important because it limits the interference of other cables in the drive to the signal.

DS200TCDAH1BJE's GE steam turbine control system has 1 advantages:

Easy to operate. The DS200TCDAH1BJE features a touchscreen panel with excellent TFT/LED display color and multi-protocol connectivity for easy operation.

Efficient. DS200TCDAH1BJE uses PLC to control the operation of the stepper motor through the stepper driver, so as to achieve a wider application of PLC in the stepper electric control.

Flexible. DS200TCDAH1BJE supports single and dual axis motion control, which can set parameters such as moving distance, speed and direction through the control panel.

Stable. After reading the set value, DS200TCDAH1BJEPLC generates pulse and direction signal through operation, and controls the stepper motor drive to achieve the purpose of distance, speed and direction control, which is stable and reliable.