燃气轮机终端板  DS200TBQGG1A  用于将板连接到驱动器内部

产品描述

GE燃气轮机终端板DS200TBQGG1A具有2个接线端子。每个模块包含 95 个信号线端子。GE燃气轮机终端板DS200TBQGG1A还包含2个跳线和6个34针连接器。该板宽 11.25 英寸，高 3 英寸，包含 5 个孔，用于将板连接到驱动器内部。驱动柜内部包含用于支撑电路板的机架，并具有与电路板上的孔对齐的螺丝孔。当您准备好安装更换板时，请检查机柜并注意旧板的安装位置。最佳做法是将更换件安装在同一位置。同样重要的是要注意电缆在电路板上的连接位置以及电缆的布线方式。这也适用于连接到端子的信号线。不正确的电缆布线会抑制或阻塞驱动器内部的空气自由流动。驱动器中的组件产生热量，驱动器使用气流来保持驱动器内部冷却。如果内部温度过高，驱动器将发出过热情况并导致驱动器自动关闭。

DS200TBQGG1A  燃气轮机终端板是燃气轮机的一个重要组成部分，通常位于燃气轮机的排气系统中。它的主要作用是收集和引导燃气轮机排出的废气，并将其排放到大气中。

终端板通常由耐高温材料制成，以承受燃气轮机排出的高温废气。它还具有良好的气体流动性和抗腐蚀性，以确保燃气轮机的正常运行和长寿命。

DS200TBQGG1A  终端板的设计和制造需要考虑多种因素，如燃气轮机的功率、排气温度、流量和压力等。它的形状和尺寸也需要根据燃气轮机的具体要求进行设计和制造。

总之，DS200TBQGG1A  燃气轮机终端板是燃气轮机排气系统中不可或缺的组成部分，它的性能和质量直接影响燃气轮机的运行效率和可靠性。

燃气轮机终端板  DS200TBQGG1A  用于将板连接到驱动器内部

Product description

The GE gas turbine terminal board DS200TBQGG1A has 2 terminals. Each module contains 95 signal line terminals. The GE gas turbine terminal board DS200TBQGG1A also contains two jumpers and six 34-pin connectors. The board is 11.25 inches wide and 3 inches high and contains five holes for attaching the board to the inside of the drive. The interior of the drive cabinet contains a rack for supporting the circuit board and has screw holes aligned with the holes in the circuit board. When you are ready to install the replacement board, check the cabinet and pay attention to the installation position of the old board. The best practice is to install the replacement in the same location. It is also important to note where the cable is connected on the circuit board and how the cable is routed. This also applies to signal wires connected to terminals. Incorrect cable routing can inhibit or block the free flow of air inside the drive. The components in the drive generate heat, and the drive uses air flow to keep the drive's interior cool. If the internal temperature is too high, the drive will emit an overheating condition and cause the drive to shut down automatically.

The DS200TBQGG1A gas turbine terminal board is an important part of the gas turbine and is usually located in the exhaust system of the gas turbine. Its main role is to collect and direct the exhaust gas from the gas turbine and discharge it into the atmosphere.

The terminal plates are usually made of high-temperature resistant materials to withstand the high-temperature exhaust gases emitted by gas turbines. It also has good gas flow and corrosion resistance to ensure the normal operation and long life of the gas turbine.

The design and manufacture of the DS200TBQGG1A terminal board requires consideration of a variety of factors, such as the power of the gas turbine, exhaust temperature, flow rate and pressure. Its shape and size also need to be designed and manufactured according to the specific requirements of the gas turbine.

In short, DS200TBQGG1A gas turbine terminal board is an indispensable part of gas turbine exhaust system, and its performance and quality directly affect the operating efficiency and reliability of gas turbine.