模数模块 DS200ADMAH1A  可用于帮助进行桥接控制

产品应用

DS200ADMAH1A可以用于多种应用，包括但不限于以下领域：

数据采集

运动控制

过程控制

工业自动化

DS200ADMAH1A是通用电气制造的LS2100系列的模数模块（ADMA）子板。该模块与 DS200DSPC 数字信号处理器控制板和 DS200SNPA SNP 协议接口子板配合使用。该模块安装在 VMEbus 机架中，可用于帮助进行桥接控制。ADMA板通过密度电缆和连接器连接到DDTB输入输出板。

DS200ADMAH1A型号通常会安装在 DSPC 板上，请注意，DSPC 板被视为主板。当安装在一起时，ADMA和DSPC板将设置滤波器和缓冲器，它们还将转换数字和模拟输入/输出信号。该型号可以在市场上轻松找到，并且可以在几本手册中找到。与ADMA板一起使用的最佳手册是随附的GEH-6373手册和GEI-100218手册。

DS200ADMAH1A型号配有一个具有两个 LED 的面板，绿色 IMOK LED 用于指示电路板是否正常工作，红色 FAIL LED 用于指示和驱动连接的 DSPC 板上的软件，这将指示 ADMA 板内是否有故障。

模数模块 DS200ADMAH1A  可用于帮助进行桥接控制

Product application

The DS200ADMAH1A can be used in a variety of applications, including but not limited to the following:

Data acquisition

Motion control

Process control

Industrial automation

The DS200ADMAH1A is a modular module (ADMA) subroutine for the LS2100 series manufactured by General Electric. The module is used with DS200DSPC digital signal processor control board and DS200SNPA SNP protocol interface board. The module is installed in the VMEbus rack and can be used to help bridge control. The ADMA board is connected to the DDTB input/output board via density cables and connectors.

The DS200ADMAH1A model will usually be installed on a DSPC board, please note that the DSPC board is considered a motherboard. When installed together, the ADMA and DSPC boards will set filters and buffers, which will also convert digital and analog input/output signals. This model can be easily found on the market and can be found in several manuals. The best manuals for use with the ADMA board are the included GEH-6373 manual and GEI-100218 manual.

The DS200ADMAH1A model comes with a panel with two leds, a green IMOK LED to indicate if the board is working properly, and a red FAIL LED to indicate and drive the software on the connected DSPC board, which will indicate if there is a fault within the ADMA board.