DS200VPBLG1A VME背板 可将数字和模拟电源层分开

描述

Ds200VPBLG1AGE电力系统控制和保护设备产品参数和规格

·输入电压:110V-125V/200V-240V AC，50/60Hz·输出电压:24V DC

·输出电流:2A

工作温度:-40℃至+70°℃

·尺寸:高度为130mm，宽度为60mm，深度为130mm·重量:0.54kg

应用领域

DS200VPBLG1A主要用于电力系统的控制和保护，如发电机控制系统、高压开关柜、变电站等。产品使用说明

·在使用前，请确保产品的电源电压和频率与要求相符。。请勿将产品放置在潮湿、尘土较多或温度过高的环境中。

。请勿将产品接入超过规定范围的电压或电流，否则可能会造成产品损坏或危险。。在使用过程中，如果出现异常情况，请及时停止使用并联系售后服务人员。

通用电气的 VME 背板板DS200VPBLG1A是一种多层板，可将数字和模拟电源层分开，该模型分为两部分。VME背板内有两种特定的转速表设置，即跳线和接线端子。

产品描述

通用电气VME背板板DS2O0VPBLG1A是一种多层板，可将数字和模拟电源层分开。该型号在每个插槽的每个电源连接处还具有旁路电容器和配电。在电路板内，有两个不同的部分，即2和3部分。电路板的J3部分通常用于电路板正面不可用的所有外部连接。J3部分还将建立与背板的电源连接.

DS2OOVPBLG1A板具有诊断连接器。此诊断连接器是26针分立式电缆连接器。诊断连接器的主要功能是提供与J1处理器的输入/输出连接。该型号还带有几种不同的转速表设置，两个主要设置是跳线和接线端子。跳线在此模型中至关重要，因为所有转速表信号都通过这些跳线。

在DS200VPBLG1A模型上，共有60个测试点。这些测试点是弹簧环，提供对数宇和模拟信号的访问，这些信号由两个输入电源上的执行器电流以及正负直流电输出的三相触发。

DS200VPBLG1A VME背板 可将数字和模拟电源层分开

Description

Ds200VPBLG1AGE Power system control and protection equipment product parameters and specifications

· Input voltage :110V-125V/200V-240V AC, 50/60Hz· Output voltage :24V DC

· Output current :2A

Operating temperature :-40℃ to +70 ℃

· Size: height 130mm, width 60mm, depth 130mm· Weight :0.54kg

Application field

DS200VPBLG1A is mainly used for the control and protection of power systems, such as generator control systems, high-voltage switchgear, substations, etc. Product instructions

· Before use, please ensure that the power supply voltage and frequency of the product are in line with the requirements. Do not place the product in a humid, dusty, or overheated environment.

. Do not connect the product to a voltage or current that exceeds the specified range. Otherwise, the product may be damaged or dangerous. In the process of use, if there is any abnormal situation, please stop the use in time and contact the after-sales service personnel.

Ge's VME backplane DS200VPBLG1A is a multilayer board that separates the digital and analog power layers, and the model is divided into two parts. There are two specific tachometer Settings within the VME backplane, namely jumpers and terminals.

Product description

The GE VME backboard DS2O0VPBLG1A is a multilayer board that separates the digital and analog power layers. This model also has bypass capacitors and power distribution at each power connection in each slot. Inside the board, there are two different parts, namely 2 and 3 parts. The J3 portion of the board is typically used for all external connections where the front of the board is not available. Part J3 will also establish a power connection to the backplane.

The DS2OOVPBLG1A board has a diagnostic connector. This diagnostic connector is a 26-pin split cable connector. The primary function of the diagnostic connector is to provide input/output connectivity to the J1 processor. This model also comes with several different tachometer Settings, the two main Settings being the jumper and the terminal. Jumpers are crucial in this model because all tachometer signals pass through these jumpers.

On the DS200VPBLG1A model, there are 60 test points. These test points are spring rings that provide access to logarithmic and analog signals triggered by actuator currents on the two input power supplies as well as three phases of positive and negative direct current outputs.