DS200PCCAG1ABB GE Mark V 系列 直流电源连接板

产品技术要求：

GE直流电源连接板DS200PCCAG1ABB作为驱动器和可控硅电源桥之间的接口。静电可以在DS200PCCAG1ABB板中积聚，如果不遵守减轻静电积聚的指导方针，则会损坏板。例如，在处理、触摸或移动单板时，必须佩戴接地带。安装单板前，请将单板放入防静电包装袋内。将袋子触摸到未涂漆的金属表面，并保持它紧贴表面几秒钟。DS200PCCAG1ABB 如果您碰巧在寒冷干燥的天气更换电路板，请特别注意防静电。你会发现在这种天气条件下静电很容易积聚起来。而且，一定要把电路板放在包装上。DS200PCCAG1ABB可以防静电，防止损坏电路板。如果在安装过程中需要放下包装，请将包装取出并压平。

The GE DC power connector DS200PCCAG1ABB serves as the interface between the driver and the thyristor power bridge. Static electricity can build up in the DS200PCCAG1ABB board and can damage the board if guidelines for mitigating static build-up are not followed. For example, a ground strap must be worn when handling, touching, or moving boards. Before installing a board, place it in an ESD bag. Touch the bag to an unpainted metal surface and hold it against the surface for a few seconds. DS200PCCAG1ABB If you happen to be replacing circuit boards in cold, dry weather, take extra care to prevent static electricity. You'll find it easy for static electricity to build up in these weather conditions. Also, be sure to put the circuit board on the packaging. DS200PCCAG1ABB is anti-static and prevents damage to the circuit board. If you need to drop the package during installation, take it out and flatten it.