VMIVME-7459  硬盘驱动器模块 支持增量数据包写入格式

Abaco Systems / VMIC VMIVME-7459-200 单插槽 VME IDE CD-RW 模块

VMIVME-7459-200：

• 2：读/写 CD 驱动器

• 0：无硬盘/CompactFlash

• 0：无电缆

部件号：332-007459-200000

可选硬盘驱动器模块或 CompactFlash。单槽(4 HP) 6U 外形规格

通过VME P2连接器连接

GE Fanuc / VMIC VMIVME-7459单槽VME IDE CD-RW/硬盘驱动器模块是一种多功能大容量存储模块，可与GE Fanuc嵌入式系统的VME处理器系列一起使用。VMIVME-7459提供多种配置，包括可写光盘和高达80GB的硬盘存储。该组件将支持一个光盘驱动器和一个硬盘驱动器以连接到单个IDE接口。CD-RW驱动器选项与照片CD、CD-I、视频CD、增强型CD.CDPLUS、CD-ROM-XA、CD-DA和CD-RW兼容。支持Disc-At-Once.Track-At-Once.Multisession和增量数据包写入格式。

CD-ROM驱动器选项支持多区段光盘，并与照片CD、CD-l、视频CD、增强型CD和CD PLUS兼容。DVD-ROM选项允许用户拥有VMIVME-7459上提供的最佳和最通用的选项。DVD-ROM允许用户读取DVD-ROM、DVD-R和DVD-RW介质，并为用户提供CD-RW功能和标准CD-ROM功能。

IDE硬盘是可选的。提供跳线以将设备配置为IDE主设备或从设备。这允许VMIVME-7459在应用中具有灵活性，因为它可以与其他GE Fanuc存储模块一起用作仅CD模块或仅硬盘模块。例如，完全填充的VMIVME-7459可以与仅包含软盘的VMIVME-7452模块一起使用。

VMIVME-7459通过VMEP2用户定义的引脚建立与单板计算机(SBC)IDE 接口的连接。SBC模块的类型和VME机箱的物理布置决定了可选电缆要求。对于具有单槽SBC的典型应用，

VMIVME-7459在物理上与SBC相邻放置。电路板之间的连接使用双槽VMXC-2电缆组件，或者为了容纳软盘模块，使用三槽VMXC-3电缆组件。对于双槽GE Fanuc SBC的应用或

VMIVME-7459未放置在SBC附近的安装，建议使用14英寸VMIXC-H电缆组件。

VMIVME-7459  硬盘驱动器模块 支持增量数据包写入格式

Abaco Systems/VMIC VMIVME-7459-200 Single-slot VME IDE CD-RW module

VMIVME-7459-200:

• 2: Read/write CD drive

• 0: No hard disk or CompactFlash

• 0: No cable

Part number: 332-007459-200000

Optional hard drive module or CompactFlash. Single slot (4 HP) 6U form factor

Connect via VME P2 connector

The GE Fanuc/VMIC VMIVME-7459 Single-slot VME IDE CD-RW/ Hard drive module is a versatile mass storage module that can be used with the VME processor family of GE Fanuc embedded systems. The VMIVME-7459 is available in a variety of configurations, including writable discs and up to 80GB of hard disk storage. The component will support a CD drive and a hard drive to connect to a single IDE interface. CD-RW drive options are compatible with photo CDS, CD-I, video CDS, enhanced CD.CDPLUS, CD-ROM-XA, CD-DA, and CD-RW. Disc-at-once-track-at-once-multisession and incremental packet write formats are supported.

The CD-ROM drive option supports multi-segment discs and is compatible with photo CDS, CD-L, video CDS, enhanced CDS, and CD PLUS. The DVD-ROM option allows the user to have the best and most general options available on the VMIVME-7459. Dvd-roms allow users to read DVD-ROM, DVD-R, and DVD-RW media, and provide users with CD-RW capabilities and standard CD-ROM capabilities.

IDE hard drive is optional. Jumpers are provided to configure the device as an IDE master or slave. This allows the VMIVME-7459 flexibility in applications as it can be used together with other GE Fanuc storage modules as either a CD only module or a hard disk only module. For example, a fully populated VMIVME-7459 can be used with a VMIVME-7452 module that contains only floppy disks.

The VMIVME-7459 establishes a connection to the IDE interface of a single board computer (SBC) via a VMEP2 user defined pin. The type of SBC module and the physical layout of the VME chassis determine the optional cable requirements. For typical applications with single-slot SBC,

The VMIVME-7459 is physically located next to the SBC. Connections between boards are made using a two-slot VMXC-2 cable assembly, or to accommodate the floppy disk module, a three-slot VMXC-3 cable assembly is used. For dual-slot GE Fanuc SBC applications or

For installations where the VMIVME-7459 is not placed near the SBC, a 14-inch VMIXC-H cable assembly is recommended.