IS420UCSCH2A-C-V0  四核控制器  可以在冗余集中使用

产品描述

该IS42oUCSCH1A是Mark Vle系列中的第—款四核控制器。该控制器由通用电气生产，是有QNX Neutrino操作系统。使用QNX Neutrino 操作系统时，该控制器能够运行高可靠性和高速操作系统。该控制器不仅使用QNX操作系统，还使用EFA(嵌入式现场代理)技术，通过稳定的连接应用Predix基于云的应用程序，以提供实时数据。

虽然与Mark Vle系列—起使用的大多数控制器都具有与设备—起使用的V/O功能，但IS420UCSCH1A控制器无法托管任何应用程序I/O。该控制器可以在冗余集中使用，当在冗余集中时，此控制器将县有冗余集中每个控制器的所有连接的IO网络，该冗余集中为控制器提供输入数据。

安装lS420UCSCH1A控制器时，需要满足几个要求，其中一些要求是，将UCSC设备直接安装到安装底座上，在UCSC上方和下方至少留出大约4英寸的气隙，并确保工作温度范围距离UCSC控制器上的任何点大约一英寸。

与IS420UCSCH1A 控制器发生的通信之一是与UDH网络的通信;要与UDH网络通信，需要使用ToolboxST应用程序配置一个4GB的闪存驱动器。确定配置所需的所有信息都可以在GEH-6855手册中找到。

G IS420UCSCH2A-C-V0.1-A是一款功能强大的工业自动化控制器，可以实现对工业自动化过程的监控、控制、数据采集和存储、网络通信等多种功能。

GE IS420UCSCH2A-C-V0.1-A控制器的参数信息:

输入/输出:IS42OUCSCH2A有多个数字输入和输出点，通常具有16个数字输入和16个数字输出。此外，它还可以配备模拟输入和输出模块，以支持模拟信号的读取和输出。

通信接口:IS420UCSCH2A支持以太网、Modbus等通信协议，可以与其他设备或系统进行数据交换和通信。它还可以配置为支持RS-232、RS-485等串行接口。

存储器:IS420UCSCH2A配备有闪存和RAM，可存储应用程序、参数设置和数据。它还支持外部SD卡或USB存储器。电源:IS420UCSCH2A通常使用24VDC电源，但也可以适应其他电压。

温度范围:IS420UCSCH2A适用于工业环境，通常工作温度范围为-40至70摄氏度。

尺寸和重量:IS42OUCSCH2A通常为紧凑型设计，尺寸约为4.2英寸(106.68毫米)x4.2英寸(106.68毫米)x2.4英寸(60.96毫米)。它的重量大约为1磅(0.45千克)。

IS420UCSCH2A-C-V0  四核控制器  可以在冗余集中使用

Product description

The IS42oUCSCH1A is the first quad-core controller in the Mark Vle series. The controller is manufactured by General Electric and is powered by the QNX Neutrino operating system. When using the QNX Neutrino operating system, the controller is capable of running a highly reliable and high-speed operating system. The controller uses not only the QNX operating system, but also EFA(Embedded Field Agent) technology to apply Predix cloud-based applications over a stable connection to deliver real-time data.

While most controllers used with the Mark Vle series have V/O capabilities that work with devices, the IS420UCSCH1A controller cannot host any application I/O. This controller can be used in a redundant set, and when in a redundant set, this controller will have all the connected IO networks of each controller in a redundant set that provides input data to the controller.

When installing the lS420UCSCH1A controller, several requirements need to be met, some of which are to mount the UCSC device directly onto the mounting base, leave at least approximately 4 inches of air gap above and below the UCSC, and ensure that the operating temperature range is approximately one inch from any point on the UCSC controller.

One of the communications that occurs with the IS420UCSCH1A controller is with the UDH network; To communicate with the UDH network, you need to configure a 4GB flash drive using the ToolboxST application. All the information needed to determine the configuration can be found in the GEH-6855 manual.

G IS420UCSCH2A-C-V0.1-A is a powerful industrial automation controller, which can realize the monitoring, control, data acquisition and storage, network communication and other functions of industrial automation process.

GE IS420UCSCH2A-C-V0.1-A Controller parameters:

Input/output: The IS42OUCSCH2A has multiple digital input and output points, typically with 16 digital inputs and 16 digital outputs. In addition, it can be equipped with analog input and output modules to support the reading and output of analog signals.

Communication interface :IS420UCSCH2A supports Ethernet, Modbus and other communication protocols, and can exchange data and communicate with other devices or systems. It can also be configured to support serial interfaces such as RS-232 and RS-485.

Memory: The IS420UCSCH2A is equipped with flash memory and RAM to store applications, parameter Settings and data. It also supports external SD cards or USB memory. Power Supply: The IS420UCSCH2A typically uses a 24VDC power supply, but other voltages can be adapted.

Temperature range: The IS420UCSCH2A is suitable for industrial environments and typically operates in a temperature range of -40 to 70 degrees Celsius.

Size and weight: The IS42OUCSCH2A is typically a compact design, measuring approximately 4.2 inches (106.68 mm)x4.2 inches (106.68 mm)x2.4 inches (60.96 mm). It weighs about 1 pound (0.45 kg).