IS210AEDBH4AGD  数字输入模块 用于工业目的的电子设备

产品描述

IS210AEDBH4AGD是GE制造的组件，作为MarkVI系统的电胳板组件。MarkVI系统是为管理燃气轮机和蒸汽轮机而创建的，具有集成的HMI/操作员界面，允许用户使用专门设计的软件(如GE的CIMPLICITY图形平台）访问系统数据。

IS210AEDBH4AGD是网桥接口卡。该组件的正面有许多连接器，包括标有5749771-11301的直角电缆连接器。有两个接头连接器，每个连接器有六个或四个位置，但每个连接器有两个垂直引脚。该板有9个公头垂直引脚连接器，引脚从6个引脚到10个引脚不等。该板还有四个插头，每个插头有三个位置.

IS210AEDBH4AGD在前表面和背面都有组件。背面主要是电容器和电阻器，但也有二极管和晶体管。正面还有电容器和电阻器，包括二十个金属膜电阻器。它还具有二极管和晶体管。前表面有四个来自Bizron的变压器。这些产品标记为B9178，是封装式开关模式/脉冲变压器，旨在满足BL额定值的高可靠性要求。变压器的耐压电平为5KVAC，开关频率为10KHz至500KHz，集成电路超过175种，包括只读芯片、振荡芯片等。

该(S210AEDBH4AGD在九个地点钻探。该板的表面有许多槽。这些插槽在其长度上由集成电路或变压器填充。该板标有多个代码。有关此电路板及其组件的更多信息，请参阅制造商出版物。

GE IS210AEDBH4AGD-电源:12-24VDC

-输入电压范围:10-30VDC

-输出电压范围:5-30VDC

-工作温度:-20°C至+70°℃

-尺寸: 90mm x 70mm x 54mm

-重量:0.25kg

GE IS210AEDBHA4AGD是一种用于工业目的的电子设备。它是一个数字输入模块，共有16个输入点。该模块设计用于GE VersaMax PLC(可编程逻辑控制器）系统。该模块结构紧凑，可以很容易地安装在控制柜中。它的电压范围为12至24状直流电，可以连接到各种输入设备，如开关、传感器和其他电子设备。

IS210AEDBH4AGD模块设计用于承受恶劣的工业环境。它的温度范围为-40至70摄氏度，设计用于抵抗冲击和振动。

该模块还配备了LED指示灯，可提供电源和通信状态等状态信息。这些指示灯便于对模块可能出现的任何问题进行故障排除。GE IS210AEDBH4AGD是一款可靠高效的数字输入模块，非常适合在工业应用中使用。

IS210AEDBH4AGD  数字输入模块 用于工业目的的电子设备

Product description

The IS210AEDBH4AGD is a GE manufactured component that serves as the electric skelete assembly for the MarkVI system. Created to manage gas and steam turbines, the MarkVI system features an integrated HMI/ operator interface that allows users to access system data using specially designed software such as GE's CIMPLICITY graphics platform.

The IS210AEDBH4AGD is a bridge interface card. The front of the assembly has a number of connectors, including a right Angle cable connector marked 574971-11301. There are two splice connectors, each with six or four positions, but each connector has two vertical pins. The board has 9 male head vertical pin connectors with pins ranging from 6 pins to 10 pins. The board also has four plugs, each with three positions.

The IS210AEDBH4AGD has components on both the front and back surfaces. The back is mostly capacitors and resistors, but there are also diodes and transistors. There are also capacitors and resistors on the front, including twenty metal film resistors. It also has diodes and transistors. There are four transformers from Bizron on the front surface. These products, labeled B9178, are packaged switching mode/pulse transformers designed to meet the high reliability requirements of BL ratings. The voltage level of the transformer is 5KVAC, the switching frequency is 10KHz to 500KHz, and there are more than 175 kinds of integrated circuits, including read-only chips and oscillating chips.

The S210AEDBH4AGD was drilled at nine sites. The surface of the plate has a number of grooves. These slots are filled along their length by integrated circuits or transformers. The board is labeled with multiple codes. For more information about this board and its components, see manufacturer publications.

GE IS210AEDBH4AGD- Power supply :12-24VDC

- Input voltage range :10-30VDC

- Output voltage range :5-30VDC

- Operating temperature :-20°C to +70° C

- Dimensions: 90mm x 70mm x 54mm

- Weight :0.25kg

The GE IS210AEDBHA4AGD is an electronic device used for industrial purposes. It is a digital input module with 16 input points. The module is designed for use in GE VersaMax PLC(Programmable Logic Controller) systems. The module is compact and can be easily installed in the control cabinet. It has a voltage range of 12 to 24 bars of direct current and can be connected to various input devices such as switches, sensors and other electronic devices.

The IS210AEDBH4AGD module is designed to withstand harsh industrial environments. It has a temperature range of -40 to 70 degrees Celsius and is designed to resist shock and vibration.

The module is also equipped with LED indicators that provide status information such as power supply and communication status. These indicators facilitate troubleshooting of any problems that may occur with the module. The GE IS210AEDBH4AGD is a reliable and efficient digital input module ideal for use in industrial applications.