IS200EXTBG4A  电子模块 采用中央控制的燃气

产品描述

IS200TRPAH1A是GE为MarkVI)系统创建的组件(PCB)。MKVI是Speedtronic系列的最后一款产品之一，是一款采用中央控制的燃气/蒸汽轮机管理系统。中央控制模块或TMR(三重模块化冗余）系统中的模块连接到终端板，终端板又将/O引入系统中的其余板。中央控制模块连接到装有CIMPLICITVY图形和控制系统工具箱等软件的操作员界面。该接口和软件允许用户访问软件配置工具和涡轮机数据。

该IS200TRPAH1A用作主跳闸端子板。这是指定为IS20OPTURH (1A或1B)的涡轮机特定主跳间V/O包的一部分。IS200TRPAH1A有

·额定速度输入为-15至140 Vdc

·急停输入额定值为18至140 Vdc

电压检测输入额定值为16至140 Vdc

触点输出电压标称值为24 Vdc，最大值为28 Vdc。

该(S20OTRPAH1A有8个连接器，包括6个37针电缆连接器。它们位于两行，每行三行。有两个垂直播针连接器(P1/P2)。还有两个接线端子。每个接线端子有24个螺钉连接。该板具有集成电路、电阻器、TP测试点、电容器、晶体管和二极管。该板标有多个代码，包括板ID号、6DAOO和6BA0O0。该板有两个工厂制造的孔，设计用于螺钉连接安装到辅助表面。

有关lS2OOTRPAH1A的更多信息，请访问制造商出版物。AXControl建议道循所有GE处理程序。我们将所有MKV板都视为静电敏感板。该板将在运输时受到方静电包装的保护。

GE IS200TRPAH2AHE是一款多功能产品，具有以下参数:-工作温度范围:-40°C至+60°C

-输入电压范围:18-32 Vdc-功耗:4.0W

-输入阻抗:20k欧姆-输出阻抗:5欧姆

GE IS200TRPAH2AHE是一种用于工业应用的电子模块。该模块设计用于在恶劣环境中提供可靠和准确的性能。它具有紧凑而坚固的设计，能够承受极端的温度、湿度和振动。

IS200TRPAH2AHE是一个双通道、16位模拟输入模块，支持一系列输入类型，包括电压、电流和热电偶。它具有诊断功能，允许用户监控模块运行状况，并在潜在问题成为重大问题之前检测这些问题。该模块与一系列通用电气系统兼容，可轻松集成到现有系统中。它具有简单直观的用户界面，易于使用和配置。

IS200EXTBG4A  电子模块 采用中央控制的燃气

Product description

The IS200TRPAH1A is a component (PCB) created by GE for the MarkVI system. The MKVI, one of the last products in the Speedtronic series, is a centrally controlled gas/steam turbine management system. The modules in the central control module or TMR(Triple Modular Redundancy) system are connected to the terminal board, which in turn introduces /O to the rest of the boards in the system. The central control module is connected to the operator interface equipped with software such as the CIMPLICITVY Graphics and Control System Toolbox. The interface and software allow users to access software configuration tools and turbine data.

The IS200TRPAH1A is used as the main trip terminal board. This is part of a turbine-specific main hop V/O package designated IS20OPTURH (1A or 1B). IS200TRPAH1A Yes

· Rated speed input is -15 to 140 Vdc

· SCram input ratings range from 18 to 140 Vdc

Voltage detection input ratings range from 16 to 140 Vdc

The nominal value of the contact output voltage is 24 Vdc and the maximum value is 28 Vdc.

The S20OTRPAH1A has eight connectors, including six 37-pin cable connectors. They are located in two rows of three lines each. There are two vertical pin connectors (P1/P2). And two terminals. Each terminal is connected with 24 screws. The board has an integrated circuit, resistor, TP test point, capacitor, transistor and diode. The board is labeled with several codes, including the board ID number, 6DAOO, and 6BA0O0. The board has two factory-made holes designed for screw attachment mounting to the auxiliary surface.

For more information about lS2OOTRPAH1A, please visit Manufacturer Publications. AXControl recommends that all GE handlers be followed. We treat all MKV boards as electrostatic sensitive boards. The board will be protected by square electrostatic packaging during transportation.

The GE IS200TRPAH2AHE is a versatile product with the following parameters :- Operating temperature range :-40°C to +60°C

- Input voltage range :18-32 Vdc- Power consumption :4.0W

- Input impedance :20k ohms - Output impedance :5 ohms

The GE IS200TRPAH2AHE is an electronic module for industrial applications. The module is designed to provide reliable and accurate performance in harsh environments. It has a compact yet robust design that can withstand extreme temperatures, humidity and vibration.

The IS200TRPAH2AHE is a dual-channel, 16-bit analog input module that supports a range of input types, including voltage, current, and thermocouple. It has diagnostic capabilities that allow users to monitor module health and detect potential issues before they become major issues. The module is compatible with a range of GE systems and can be easily integrated into existing systems. It has a simple and intuitive user interface that is easy to use and configure.