IC698CMX016-ED  存储器交换模块 支持冗余传输模式操作

IC698CMX016-ED是一款控制。

它是PACSystem RX7i平台的一部分，以前由GE智能平台（GE IP）生产，现在由艾默生自动化生产。该模块主要用于使用反射存储技术通过光纤网络在PLC和兼容设备之间提供数据的确定性共享。它配备了16MB SDRAM，工作电压为+5VDC，由电源提供，电流要求为1.8安培。此模块需要安装到主机架上，并连接到插槽3或4。它采用光纤LC型，插入损耗为0.35dB（最大值），回波损耗为-30dB。该组件本质上是一个存储模块，但是，IC698CMX016的主要功能是使用反射式存储器技术通过光纤网络在PLC和兼容设备之间提供确定性的数据共享。该内存模块能够与每个网络多达256个节点通信，并支持冗余传输模式操作。

IC698CMX016-ED是GE Fanuc RX7i系列的控制内存Xchange模块1。IC698CMX016-ED是一款控制存储器交换模块，它是PACSystem RX7i平台的一部分，以前由GE智能平台(GEIP)生产，现在隶属于艾默生自动化。该模块主要用于使用反射存储技术通过光纤网络在PLC和兼容设备之间提供数据的确定性共享。它配备了16MB SDRAM，工作电压为+5VDC，电流要求为1.8安培2。

IC698CMX016-ED GE技术说明

IC698CMX016-ED是GE Fanuc RX7i系列的控制内存Xchange模块，它为自动化系统提供高速数据传输和实时通信能力。它支持MODBUS、TCP/IP、SRTP、EGD等多种通信协议。它符合IEEE 802.3u标准，支持10/100mbps的数据传输速率。

IC698CMX016-ED  存储器交换模块 支持冗余传输模式操作

IC698CMX016-ED is a control memory switch module.

It is part of the PACSystem RX7i platform, formerly manufactured by GE Intelligent Platforms (GE IP) and now manufactured by Emerson Automation. The module is primarily used to provide deterministic sharing of data between PLCS and compatible devices over a fiber optic network using reflective storage technology. It is equipped with 16MB SDRAM, operates at +5VDC, is supplied by the power supply, and the current requirement is 1.8 amps. This module needs to be mounted to the mainframe and connected to slot 3 or 4. It uses fiber LC type with insertion loss of 0.35dB (maximum) and return loss of -30dB. The component is essentially a storage module, however, the main function of the IC698CMX016 is to provide deterministic data sharing between the PLC and compatible devices over a fiber optic network using reflective memory technology. The memory module is capable of communicating with up to 256 nodes per network and supports redundant transport mode operation.

IC698CMX016-ED is the control memory Xchange module 1 of GE Fanuc RX7i series. The IC698CMX016-ED is a control memory switch module that is part of the PACSystem RX7i platform, formerly manufactured by GE Intelligent Platforms (GEIP) and now owned by Emerson Automation. The module is primarily used to provide deterministic sharing of data between PLCS and compatible devices over a fiber optic network using reflective storage technology. It is equipped with 16MB SDRAM with an operating voltage of +5VDC and a current requirement of 1.8 amps 2.

IC698CMX016-ED GE Technical description

IC698CMX016-ED is the control memory Xchange module of GE Fanuc RX7i series, which provides high-speed data transmission and real-time communication capability for automated systems. It supports MODBUS, TCP/IP, SRTP, EGD and other communication protocols. It complies with the IEEE 802.3u standard and supports 10/100mbps data transfer rates.