IC698PSA100  GE 电源模块 过热和过压故障保护功能

品牌：GE 

型号：IC698PSA100 

产品名称：CPU处理器模块

产品净宽：53毫米

产品净高：125毫米

产品净深/长度：260毫米

产品净重：0.7公斤

IC698PSA100是多功能电源模块，通常用于GE（通用电气）的工业自动化和控制系统中。

IC698PSA100额定电压为120/240伏交流电或125伏DC，输入电压范围在85到264伏交流电或100到150伏DC之间，位于Rx7i系统底板最左侧的插槽或插槽0中，额定功率为125瓦，输出电压为5伏DC、12伏DC和-12伏DC。

描述： 该IC698PSA100是一个电源模块，是 PACSystem RX7i 平台的一部分，目前隶属于艾默生自动化，以前由 GE 智能平台 （GE IP） 生产。该电源安装在 RX7i 通用背板上。它的输入电压范围为 85 至 264 VAC、47 至 63 Hz 和 100-150VDC，最大输入功率为 125 瓦（典型值）和 150 瓦（最大值）。它的最大输出功率为 100 瓦，适用于所有三 （3） 个输出，例如 5 VDC、12 VDC 和 -12 VDC，输出电流分别为 0-20 安培、0-2 安培和 0-1 安培。

IC698PSA100是GE Fanuc为RX7i系列制造的多功能电源模块。 该 PACSystems 模块为背板上的模块提供 +5 VDC、+12 VDC 和 -12 VDC 电源以及逻辑电平排序信号。模块直接插入主机架的插槽 0。IC698PSA100模块的电源输出最多可以损失一个交流输入线路周期，而不会实际损失输出功率。此外，还具有过流、过热和过压故障保护功能。该模块可在 0 至 60ºC 的环境温度下实现 100 瓦的总输出功率，无需强制风冷。

IC698PSA100  GE 电源模块 过热和过压故障保护功能

Brand: GE

Model: IC698PSA100

Product name: CPU processor module

Product width: 53 mm

Product height: 125 mm

Product net depth/length: 260 mm

Net weight: 0.7 kg

The IC698PSA100 is a multifunctional power module commonly used in GE (General Electric) industrial automation and control systems.

The IC698PSA100 is rated at 120/240 volts AC or 125 volts DC with an input voltage range between 85 and 264 volts AC or 100 and 150 volts DC, located in the far left slot or slot 0 of the Rx7i system base plate with a power rating of 125 watts. The output voltages are 5 V DC, 12 V DC and -12 V DC.

Description: The IC698PSA100 is a power module that is part of the PACSystem RX7i platform, currently owned by Emerson Automation and previously manufactured by GE Intelligent Platforms (GE IP). The power supply is installed on the RX7i universal backplane. It has an input voltage range of 85 to 264 VAC, 47 to 63 Hz and 100 to 150VDC, with a maximum input power of 125 watts (typical) and 150 watts (maximum). It has a maximum output power of 100 watts and is suitable for all three (3) outputs, such as 5 VDC, 12 VDC and -12 VDC, with output currents of 0-20 amps, 0-2 amps and 0-1 amps, respectively.

The IC698PSA100 is a multifunctional power module manufactured by GE Fanuc for the RX7i series. The PACSystems module provides +5 VDC, +12 VDC, and -12 VDC power to the modules on the backplane, as well as logic level ordering signals. The module plugs directly into slot 0 of the host frame. The power output of the IC698PSA100 module can lose up to one AC input line cycle without actually losing output power. In addition, it also has over current, over heat and over voltage fault protection. The module can achieve a total output power of 100 watts at ambient temperatures of 0 to 60ºC without forced air cooling.