DS200KLDCG1AAA GE 电源板组件 具有多种保护功能

制造者 GE通用电气

系列 马克五世

零件编号 DS200SDCCG1A

产品类型 驱动控制卡

说明书 GEI-100029

DS200KLDCG1AAA是通用电气Mark V系列中的一种电源板组件。

DS200KLDCG1AAA电路板是Mark V系列中的一块电源板，它包含两个独立的15针连接器、两个24针连接器和多个跳线，以及一个电源指示LED。该电源板为驱动器和机箱风扇提供控制级电源，并具有过流保护、过压保护、欠压保护等多种保护功能，以确保系统的安全和稳定运行。

GE Key/LED/显示板DS200KLDCG1AAA具有 32 个 LED、21 个 4 字符显示屏和 1 个跳线。GE Key/LED/显示板DS200KLDCG1AAA在板的背面还有一个 40 针连接条。电路板上的跳线用于通过改变跳线在引脚上的位置来修改其行为。例如，如果跳线覆盖引脚 1 和 2，则可以将跳线移动到引脚 2 和 3。原始电路板附带的文档描述了跳线以及移动跳线如何改变电路板的行为。

但是，DS200SDCCG1A有些跳线仅供工厂使用，维修人员不得移动。在这种情况下，跳线用于制造过程中的测试，不支持跳线处于备用位置的电路板操作。有关详细信息，请参阅主板随附的信息。

该板连接到驱动柜，每个角的四个孔中插入螺钉。这些孔与驱动器机柜机架上的螺丝孔对齐。在卸下有缺陷的电路板之前，请注意电路板的安装位置以及电缆在机柜中的布线方式。电缆布线很重要，因为如果信号电缆离高压电缆太近，它可以保护驱动器免受高压电流的干扰。此外，DS200SDCCG1A电缆布线有助于保持适当的气流。不正确的电缆布线可能会阻碍气流并导致组件发热。

模拟量输入HART模块，16通道单端，8通道差分，通道可配置为电压、电流和电流/ HART。支持电流：0 to 20mA, 4 to 20mA, +/- 20mA; 电压：+/- 10V、0 到 10V、+/- 5V、0 到 5V、1 到 5V

IC695ALG626

模拟输入 HART 模块

I/O 模块

16 通道单端

8 通道差分

通道可配置电压和电流和电流/HART 支持电流

0 到 20 MA

4 到 20 MA

+/- 20 MA

规格：3.5x13.5x13.5cm，0.24kg

DS200KLDCG1AAA GE 电源板组件 具有多种保护功能

Manufacturer GE General Electric

Series Mark V

Part number DS200SDCCG1A

Product type Drive control card

Specification GEI-100029

The DS200KLDCG1AAA is a power board component in the General Electric Mark V series.

The DS200KLDCG1AAA circuit board is a power board in the Mark V series that contains two separate 15-pin connectors, two 24-pin connectors and multiple jumpers, as well as a power indicator LED. The power supply board provides control level power for the driver and chassis fan, and has multiple protection functions such as overcurrent protection, overvoltage protection, and undervoltage protection to ensure the safe and stable operation of the system.

The GE Key/LED/ Display board DS200KLDCG1AAA features 32 leds, 21 4-character displays, and 1 jumper. The GE Key/LED/ display board DS200KLDCG1AAA also has a 40-pin connection bar on the back of the board. Jumpers on the board are used to modify their behavior by changing the position of the jumpers on the pins. For example, if the jumper covers pins 1 and 2, you can move the jumper to pins 2 and 3. The documentation that came with the original board describes the jumpers and how moving them changes the behavior of the board.

However, some of the DS200SDCCG1A jumpers are for factory use only and cannot be moved by maintenance personnel. In this case, the jumper is used for testing during the manufacturing process and does not support board operation with the jumper in the spare position. For more information, see the information that comes with the motherboard.

The plate is connected to the drive cabinet and screws are inserted into four holes at each corner. Align these holes with the screw holes on the driver cabinet rack. Before removing a defective circuit board, note where the circuit board is installed and how cables are routed in the cabinet. Cable routing is important because it protects the driver from high-voltage current if the signal cable is too close to the high-voltage cable. In addition, DS200SDCCG1A cabling helps maintain proper airflow. Incorrect cable routing can block airflow and cause components to heat up.

Analog input HART module, 16-channel single-ended, 8-channel differential, channels can be configured for voltage, current, and current/HART. Support current: 0 to 20mA, 4 to 20mA, +/- 20mA; Voltage: +/- 10V, 0 to 10V, +/- 5V, 0 to 5V, 1 to 5V

IC695ALG626

Simulated input HART module

I/O module

16 channels single-ended

8-channel difference

The channel can be configured with voltage and current and current /HART support current

0 to 20 MA

4 to 20 MA

+/- 20 MA

Specification: 3.5x13.5x13.5cm, 0.24kg