DS200DCFBG1BNC GE 电源板 具有过流保护、过压保护

产品编号： DS200DCFBG1BNC

商品编号SKU： DS200DCFBG1BNCGBTC

制造商： GE Boards & Turbine Control

系列： Mark V DS200

输入电压：24V DC

工作温度：0℃ 到 60℃

内存容量：32 MB RAM，64 MB Flash ROM

通讯接口：Ethernet、RS-232、RS-485

支持的编程语言：C、C++、LD、ST、IL、FBD、SFC、IL

支持的操作系统：Windows、Linux、VxWorks

输出点数：最多4096个数字输出点和2048个模拟输出点

高速运算能力：GE DS200DCFBG1BNC 采用高性能的中央处理器和先进的数字信号处理技术，可以快速处理各种控制任务。

DS200DCFBG1BNC是通用电气Mark V系列的替换和可选电源板。

DS200DCFBG1BNC电路板是Speedtronic Mark V系列中的一块电源板，用于为驱动器和机箱风扇提供控制级电源。它是一个大型矩形电路板，表面安装了大量元件，包括电源模块、控制模块和接口模块等。该电源板还具有过流保护、过压保护、欠压保护等多种保护功能，以确保系统的安全和稳定运行。

DS200DCFBG1BNC 是为通用电气的 Mark V 系列替换板和可选板制造的电源板。DS200DCFBG1BNC电路板是 Speedtronic Mark V 控制系统的一部分。系统控制级电源以及机柜风扇由此卡供电。该卡与许多GE品牌的励磁机和驱动器兼容，可以安装在各种系统中。FC2000、AC2000、DC2000、ME2000 和 CB2000 系列的驱动器可以使用此板。馈入电路板的电压可在 38 至 115 VAC 范围内安全额定值。

DS200DCFBG1BNC电路板周围有五个电路。这些电路包括驱动电路、控制级电源电路、电机励磁电源电路以及交流和直流监控电路。为确保电路不中断，船上的三个保险丝受到保护。如果需要注意任何保险丝，集成的 LED 和霓虹灯指示灯将提醒用户。监控电压电平很重要，可以使用卡上的五个测试点之一来完成。用户可使用 12 个跳线和 7 个 DIP 开关进行配置。

应满足电路板和驱动器随附的安装参数。遵循这些将确保DS200DCFBG1BNC和驱动器将按预期运行。

DS200DCFBG1BNC GE 电源板 具有过流保护、过压保护

Product Number: DS200DCFBG1BNC

Product Code SKU: DS200DCFBG1BNCGBTC

Manufacturer: GE Boards & Turbine Control

Series: Mark V DS200

Input voltage: 24V DC

Operating temperature: 0℃ to 60℃

Memory capacity: 32 MB RAM, 64 MB Flash ROM

Communication interface: Ethernet, RS-232, RS-485

Supported programming languages: C, C++, LD, ST, IL, FBD, SFC, IL

Supported operating systems: Windows, Linux, VxWorks

Output points: up to 4096 digital output points and 2048 analog output points

High-speed computing capability: GE DS200DCFBG1BNC uses high-performance central processor and advanced digital signal processing technology, which can quickly process various control tasks.

The DS200DCFBG1BNC is an alternative and optional power board for the General Electric Mark V series.

The DS200DCFBG1BNC board is a power board in the Speedtronic Mark V series that provides control-level power to drivers and chassis fans. It is a large rectangular circuit board with a large number of components mounted on the surface, including power modules, control modules and interface modules. The power supply board also has overcurrent protection, overvoltage protection, undervoltage protection and other protection functions to ensure the safe and stable operation of the system.

The DS200DCFBG1BNC is a power supply board manufactured for General Electric's Mark V Series replacement boards and optional boards. The DS200DCFBG1BNC circuit board is part of the Speedtronic Mark V control system. The card supplies power to the system control power supply and the fan of the cabinet. The card is compatible with many GE branded exciters and drives and can be installed in a variety of systems. Drives in the FC2000, AC2000, DC2000, ME2000, and CB2000 series can use this board. The voltage fed into the board can be rated safely in the range of 38 to 115 VAC.

There are five circuits around the DS200DCFBG1BNC circuit board. These circuits include drive circuits, control level power supply circuits, motor excitation power supply circuits, and AC and DC monitoring circuits. To ensure that the circuit is not interrupted, the three fuses on the ship are protected. If any fuses need attention, integrated LED and neon indicators will alert the user. Monitoring voltage levels is important and can be done using one of the five test points on the card. The user can configure with 12 jumpers and 7 DIP switches.

The installation parameters included with the circuit board and driver should be met. Following these will ensure that the DS200DCFBG1BNC and the drive will operate as expected.