IC698RMX016-ED  GE 冗余内存交换模块

GE+IC698RMX016-ED产品详情:

原产地:美国品牌:GE

型号:IC698RMX016-ED

最低订单数量:1项

产品描述

GEFanuc的IC6S8RMXO16是用于RxTl Pacsystem 的16MB冗余内存交换。它具有以下尺寸:6.299英寸宽x9.187英寸高。它具有16MB的SDRAM用户内存电源的工作电压为+5VDC。当前要求为1.4。该装置具有符合lEC6175420标准的f ber光学LC型连接器和ziconin陶瓷去圈。最大插入损耗为0.56B，回波损托为-30dB。可接受的温度范围在-2C至+5℃之间。要完成安装，您需要确保具备以下所有条件;具有20或更高版本固件的PACS/stems RXTCPU,带电源的PACSyslemsRiTiCPU机架一台与PC兼容的计算机，带有CMAPLCITY Machie idtion-loyic DerelopePLC，4.5或更高版本的编程软件以及必要的电缆。

IC698RMX016是冗余内存交换模块。它是 PACSystem RX7i平台的一部分，目前隶属于艾默生自动化，以前由GE智能平台(GE IP)生产。该模块主要用于冗余CPU配置或作为可通过网络访问的反射式内存模块。它配备16MB SDRAM，工作电压为+5VDC，由电源和1.8安培的电流要求提供。此模块需要安装到主机架并连接到插槽3或4。它采用光纤LC类型，插入损耗为0.35 dB(最大值)，回波损耗为-30dB。

10598RLX016最初在未配置状态下上电，此时其光发射器被禁用。在RXTiCPU向元余内存交换摸块发送硬件配置之前，该模块将不会在网络上运行，为了实现反射内存操作，用户可以选择配置以下参数:冗余传输模式、节点1D、网络内存偏移、恶意主妇和中断启用。请注意，如果选择了冗余链路操作，则上述参数将由CPU设置，因此不可配置。请注意，1C389RMX0165用作具有通用用部的反射式存储器模块，超出基本读写操作的附加功能，包括读取中断状态、使能中断、读取奇偶校验错误和使能奇偶校验，可由用户逻辑执行。

IC698RMX016-ED  GE 冗余内存交换模块

GE+IC698RMX016-ED Product Details:

Origin: United States Brand :GE

Model :IC698RMX016-ED

Minimum order quantity :1 item

Product description

GEFanuc's IC6S8RMXO16 is a 16MB redundant memory swap for RxTl Pacsystem. It has the following dimensions :6.299 inches wide x9.187 inches high. It has a 16MB SDRAM user memory power supply with an operating voltage of +5VDC. The current requirement is 1.4. The device has an optical LC type connector in accordance with lEC6175420 and ziconin ceramic unwinding. The maximum insertion loss is 0.56B and the echo loss support is -30dB. Acceptable temperatures range from -2C to +5 ° C. To complete the installation, you need to ensure that you have all of the following conditions; PACS/stems RXTCPU with firmware version 20 or higher, PACSyslemsRiTiCPU rack with power supply A PC-compatible computer with CMAPLCITY Machie idtion-loyic DerelopePLC, Programming software 4.5 or higher and necessary cables.

The IC698RMX016 is a redundant memory switch module. It is part of the PACSystem RX7i platform, currently owned by Emerson Automation, and was previously manufactured by GE Intelligence Platforms (GE IP). This module is primarily used for redundant CPU configuration or as a reflective memory module that can be accessed over a network. It is equipped with 16MB SDRAM and operates at +5VDC, supplied by a power supply and 1.8 amps of current requirements. This module needs to be mounted to the mainframe and connected to slot 3 or 4. It uses fiber LC type with insertion loss of 0.35 dB(maximum) and return loss of -30dB.

10598RLX016 is initially powered on in an unconfigured state, at which point its optical emitter is disabled. The module will not run on the network until the RXTiCPU sends the hardware configuration to the meta residual memory swap block, and in order to implement reflective memory operations, the user can choose to configure the following parameters: redundant transport mode, node 1D, network memory offset, Malicious Housewife, and interrupt enabled. Note that if redundant link operation is selected, the above parameters are set by the CPU and therefore cannot be configured. Please note that 1C389RMX0165 is used as a reflective memory module with general purpose parts, and additional functions beyond basic read and write operations, including reading interrupt states, enabling interrupts, reading parity errors, and enabling parity, can be performed by user logic.