IS220PSVOH1A GE 伺服控制包 电气接口

型号：IS220PSVOH1A

品牌：GE

IS220PSVOH1A是Mark Vle系列下的伺服控制包。通用电气为其Mark VI或Mark Vle系统开发了这一组件。蒸汽和燃气轮机系统由这两个系统控制。IS220PSVOH1A的功能相当于一个伺服控制包。这个组件是GE为他们的Mark VIE或Mark Vle系统制造的。这两个系统都用于控制蒸汽和燃气轮机系统。

IS220PSVOH1A提供一个或两个/O以太网网络和TSVO伺服端子板之间的电气接口。IS220PSVOH1A使用WSVO伺服股驱动器模块来处理两个伺服阀位置回路。PSVO有一个带有多个LED指示灯的前面板。其中包括指示两个以太网网络(ENet1/Enet2)状态的四个led，一个电源和A4ttn LED，以及另外两个标记为ENA1/2的LED。前面也有一个单一的红外端口，这不是在这个包使用。

IS220PSVOH1A在安装后配置有控制系统工具箱应用程序。该组件包括一个带有输入电源连接器的处理器板、本地电源和一个用于温度监控的内部传感器。板上还有闪存和RAM。该板连接到采集板。

IS220PSVOH1A在被更换时可以自动重新配置。该选项通过组件编辑器通过ToolboxST应用程序启用/禁用。如果需要，组件编辑器还允许操作员手动重新配置模块。更换端子板时，必须手动重新配置I/O组件。

IS220PSVOH1A伺服控制包是一种用于控制伺服电机的设备，它通过接收来自伺服驱动器的信号，控制伺服电机的运转，实现位置、速度、力矩等控制。伺服控制包通常由控制器、驱动器、电机等组成，其中控制器是伺服控制包的核心部分，负责接收来自上位机的控制信号，并将其转换为电机控制信号；驱动器则将控制信号转换为电机的输入信号，控制电机的运转；电机则是被控制的对象，根据控制信号进行运转。伺服控制包具有高精度、高速度、高效率等特点，被广泛应用于数控机床、机器人、自动化生产线等领。

IS220PSVOH1A GE 伺服控制包 电气接口

Model: IS220PSVOH1A

Brand: GE

IS220PSVOH1A is a servo control package under the Mark Vle series. Ge developed this component for its Mark VI or Mark Vle system. The steam and gas turbine systems are controlled by these two systems. The function of IS220PSVOH1A is equivalent to a servo control package. This component is manufactured by GE for their Mark VIE or Mark Vle system. Both systems are used to control steam and gas turbine systems.

The IS220PSVOH1A provides an electrical interface between one or two /O Ethernet networks and the TSVO servo terminal board. The IS220PSVOH1A uses the WSVO servo actuator module to handle the two servo valve position loops. The PSVO has a front panel with multiple LED indicators. These include four leds indicating the status of two Ethernet networks (ENet1/Enet2), a power supply and A4ttn LED, and two more leds labeled ENA1/2. The front also has a single infrared port, which is not used in this package.

The IS220PSVOH1A is configured with the Control System Toolbox application after installation. The component includes a processor board with an input power connector, a local power supply, and an internal sensor for temperature monitoring. There's also flash memory and RAM on the board. The board is connected to the acquisition board.

The IS220PSVOH1A can be automatically reconfigured when it is replaced. This option is enabled/disabled through the ToolboxST application via the component editor. The component editor also allows the operator to manually reconfigure the module if needed. When replacing a terminal board, you must manually reconfigure the I/O component.

IS220PSVOH1A servo control package is a kind of equipment used to control the servo motor, it receives the signal from the servo drive, controls the operation of the servo motor, realizes the position, speed, torque and other control. The servo control package is usually composed of controller, driver, motor, etc. The controller is the core part of the servo control package, which is responsible for receiving the control signal from the host computer and converting it into the motor control signal. The driver converts the control signal into the input signal of the motor to control the operation of the motor; The motor is the controlled object and operates according to the control signal. Servo control package has the characteristics of high precision, high speed and high efficiency, and is widely used in CNC machine tools, robots, automatic production lines and so on.