IS200TBAIH1CCC GE 电子元件 模拟端子板

产品详情:

原产地:美国

品牌:GE

型号:1IS200TBAlH1CCC

最低订单数量:1项

IS200TBAIH1CCC是一个长印刷电路板与各种各样的电子元件。IS200TBAIH1CCC上最大的部件是两个长黑色端子块，固定在左边边缘。这些端子座被标识为TB1和TB2。两个端子块都可以包含多达十二(12)个看起来像立方体的银金属端子。坐在IS200TBAIH1CCC的对面是三个(3长插孔连接器端口。连接器端口每个有三十七(37)个小母连接器，可用于附加额外的组件或板到IS200TBAIH1CCC。连接器标识为JT1、JS1和JR1。IS200TBAlH1CCC的中心被各种不同的部件所占据。IS200TBAH1CCC上至少有10个晶体管，大部分排列在中间。十(10)个可变电阻或电位器也沿着

IS200TBAIH1CCC的中心对齐。在IS200TBAIH1CCC上可以看到二十(20)对的跳线引脚。每一对跳线引脚由红色跳线连接。将引脚对连接在一起可以调节IS200TBAIH1CCc的功能。

IS200TBAlH1C是称为模拟端子板的设备。该PCB或印刷电路板是General Electric的Mark VvI系列的一部分。通用电气的Mark Vl和Mark系列中的其他系列昔在控制和自动化燃气轮机和蒸汽轮机的过程。

IS200TBAIH1C印刷电路板是一种非常长而纤薄的设备。IS20OTBAIH1C的左半部分由两(2)个黑色接线端子占据。每个接线端子最多可包含1个端子，这些端子是立方体形状的，由银色金属制成。这些终端总共有四十八个终端，标记为一(48)）到四十八(200)。IS1TBAIHBC右边缘的大部分由三(200)个中等大小的连接器端口占据。这些连接器端口垂直排列在lS1TBAIH20OC的右侧。长长的电子元件在IS1TBAH10C中央垂直排列。十(20)个电位计或可变电阻器均匀分布在IS1TBAIH4C的中心。四(200)个额外的电位计已组合在lS1TBAIH9C的右下角。至少有力(200)个黑色小晶体管沿着IS1TBAH20OC中心部分的右侧排列。同样位于IS1TBAH20C中央的是一系列至少二十(2)个红色跳线。每个跳线用于将至少两(200）个小金属跳线引脚连接在一起。IS1TBAH<>C的中间部分还覆盖着许多小的黑色矩形二极管

IS200TBAIH1CCC GE 电子元件 模拟端子板

Product Details:

Country of Origin: USA

Brand :GE

Model :1IS200TBAlH1CCC

Minimum order quantity :1 item

IS200TBAIH1CCC is a long printed circuit board with a wide variety of electronic components. The largest pieces on the IS200TBAIH1CCC are two long black terminal blocks that are fixed to the left edge. These terminal blocks are identified as TB1 and TB2. Both terminal blocks may contain up to twelve (12) silver metal terminals that look like cubes. Sitting on the opposite side of the IS200TBAIH1CCC are three (3 long jack connector) ports. Connector ports Each has thirty-seven (37) small female connectors that can be used to attach additional components or boards to the IS200TBAIH1CCC. Connectors are identified as JT1, JS1, and JR1. The center of the IS200TBAlH1CCC is occupied by a variety of different components. There are at least 10 transistors on the IS200TBAH1CCC, most of them arranged in the middle. Ten (10) variable resistors or potentiometers are also along

IS200TBAIH1CCC center alignment. Twenty (20) pairs of jumper pins can be seen on IS200TBAIH1CCC. Each pair of jumper pins is connected by a red jumper. Connecting the pin pairs together can regulate the function of the IS200TBAIH1CCc.

The IS200TBAlH1C is a device called an analog terminal board. The PCB, or printed circuit board, is part of General Electric's Mark VvI series. Ge's Mark Vl and other series in the Mark family control and automate the processes of gas and steam turbines.

The IS200TBAIH1C printed circuit board is a very long and thin device. The left half of the IS20OTBAIH1C is occupied by two (2) black terminals. Each terminal can contain up to 1 terminal, which is cube-shaped and made of silver metal. These terminals have a total of forty-eight terminals, labeled one (48) through forty-eight (200). Most of the right edge of the IS1TBAIHBC is occupied by three (200) medium sized connector ports. These connector ports are arranged vertically on the right side of the lS1TBAIH20OC. Long electronic components are arranged vertically in the center of the IS1TBAH10C. Ten (20) potentiometers or variable resistors are evenly distributed in the center of the IS1TBAIH4C. Four (200) additional potentiometers have been assembled in the lower right corner of the lS1TBAIH9C. At least 200 small black transistors are arranged along the right side of the central portion of the IS1TBA 20oC. Also located in the center of IS1TBAH20C is a series of at least twenty (2) red jumpers. Each jumper is used to connect at least two (200) small metal jumper pins together. The middle part of IS1TBAH<>C is also covered with a number of small black rectangular diodes.