IC698CRE040 GE 论理器模块 冗余链路

描述:GE Fanuc/ Emerson Automation IC698CRE040是一款PACSystem RX7i论理器模块。该处理器具有64MB RAM和64MB非易失性用户内存，典型扫描速率为每0个布尔触点/线圈024.1000ms。该处理器具有两(2)个串行通信、一 (1)个工作站管理器端口和两(2)个以太网接口。

产品描述

I0638CRE640 PASystemsRKXTi是一款经过编程和配置的CFU，用于对机器、过程和勃跺搬运系统进行实时控制。VO通信和智能选件模块通信通过VIME64标准格式在相架安装背板上进行。嵌入式以太网端口(或串行端口)允许CPU与编程器和HMI设备进行通信。

该CPU配备180OMHz Pentum-M微处理器、64MB电池供电用户内存和64MB非易失性用户闪存，适用于各种类型的用户内存。它还具有热备用(HSB)冗余。需要注意的是，后者需要在每个单元中

配置一个冗余CPU和冗余内存Xchange模块(IC698RMX016)作为冗余链路。该单元也是可通过参考表%W访问的大容量内存。

该IC698CRE040支持90-70系列以及通信和其他模块（包括VME)的离散和模拟VO。请注意:设备安装手册中提供了完整列表。

总共有1⒃6个We的服务器和FTP连接，可以监控VNeh 数据。该装置提供字内参考和日历时钟，该时钟由电池供电。可以使用RS-232或RS-45串行说口启动CPU模块的固件升级。RS-2以太网端口用于站点管理。

此外，该C68CREO40还配备了嵌入式以太网接口，可支持SRTP通道、MobusTCP服务器和MoobusTCP客户说。两个全双工端口提供自动协商的网络速度和交叉检测。用户可配置的几余IP允许EGD配置交换生产。

CPU的功率要求为+5VDC:标称6.8安培/+12 VDC: 0.003安培标称值/-12VDC: 0.003安培标称值。

PLC硬件组成

PLC的硬件主要由中央处理器(CPU)、存储器、输入单元、输出单元、通信接口、扩展接口、电源等部分组成。其中CPU是PLC的核心，按照系统程序赋予的功能，指挥PLC有条不紊地进行工作

IC698CRE040 GE 论理器模块 冗余链路

Description :GE Fanuc/ Emerson Automation IC698CRE040 is a PACSystem RX7i logic module. The processor has 64MB of RAM and 64MB of non-volatile user memory, with a typical scan rate of 024.1000ms per 0 Boolean contacts/coils. The processor has two (2) serial communications, one (1) workstation manager port, and two (2) Ethernet interfaces.

Product description

The I0638CRE640 PASystemsRKXTi is a CFU programmed and configured for real-time control of machines, processes and processing systems. VO communication and intelligent option module communication is carried out in the VIME64 standard format on the frame mounting backplane. An embedded Ethernet port (or serial port) allows the CPU to communicate with the programmer and HMI devices.

Equipped with a 180OMHz Pentum-M microprocessor, 64MB battery-powered user memory and 64MB non-volatile user flash memory, the CPU is suitable for all types of user memory. It also has hot standby (HSB) redundancy. Note that the latter needs to be in each cell

Configure a redundant CPU and redundant memory Xchange module (IC698RMX016) as a redundant link. This unit is also a large memory that can be accessed through the reference table %W.

The IC698CRE040 supports discrete and analog VO for the 90-70 series as well as communication and other modules, including VME. Please note: A complete list is provided in the device installation manual.

In total, there are 1⒃6 We servers and FTP connections that can monitor VNeh data. The device provides an in-word reference and calendar clock, which is battery powered. The firmware upgrade of the CPU module can be initiated using the RS-232 or RS-45 serial interface. The RS-2 Ethernet port is used for site management.

In addition, the C68CREO40 is equipped with an embedded Ethernet interface that supports SRTP channels, MobusTCP servers, and MoobusTCP customers. Two full-duplex ports provide auto-negotiated network speeds and cross detection. Several user configurable IP addresses allow EGD to configure switching production.

CPU power requirements are +5VDC: nominal 6.8 amps /+ 12VDC: 0.003 amps /-12VDC: 0.003 amps.

PLC hardware composition

The hardware of PLC is mainly composed of central processing unit (CPU), memory, input unit, output unit, communication interface, expansion interface, power supply and so on. Among them, CPU is the core of PLC, and commands PLC to work methodically according to the function given by the system program