IC695PBM300 GE 主站模块 网络实现数据交换

I0895PBM30是GEFalnwcARX3i系列的FROFEU3主站模块。该模块允许RXiCPU在PROFBUS-OP网络上发送和接收数据。

技术规格

模块类型:PROFIBUS

品牌：GE

型号：IC695PBM300

主站插槽数量:1(单插槽)

背板支持:普遍

协议支持:多达125个PROFIBUS-DP从站

通信端口:RS-232接口

内部功率:440毫安@3.3伏直流电

该C695BPM300是Profibus主站模块，以前由GE智能平台(GEIP)制造，现在隶属于艾默生自动化的PACSystems RX3可编程自动化控制器(PAC）系列。该模块用于通过Profibus网络实现数据交换，最大输入数据为3.584字节，输出数据为3584字节。该Profbus主站模块支持多达125个DP从站的通信，每个DP从站可以发送24字节的输入数据并接收244字节的输出数据。

该C695BPM300支持所有标准数据速率，包括9.6kBis、19.2NBiwts、93.75kBiis、187.5 kits、500 kEits、1.5 MBtis、3 MBits、6 MBts和12 MBis。它可以提供状态信息，例如如从状态位阵列表、网络诊断计数器、DP主诊断计数器、固件模块修订版和从诊断地址。它安装在RX3背板上，支持PC连接。具体而言，它必须安装在具有运行固件版本3.2或更高版本的主机PACSystem RX9i控制器的通用背板中。它消耗的背板电流为440 mA@3.3 VDC.

IC695PBM300 PROFIEBUS主站模块由GE Intelient Platforms(GE Fanuc在RX3iPacSystens系列中制造。该模块旨在使PX3iCPU能够通过PROFIBUS-DP网络发送或接收数据。它有一个插糟，支持通用背板和RS-232通信端口。IC695PBM300 PROFIEUS模块在额定电压为40.3VDC时具有3 mamp的内部额定电流。并支持多达125个PROFIEBUS-DP从站单元的协议。该模块的其他显着特性包括支持每个从单元速率高达244字节的输入数据和速率高达244字节的输出数据，支持所有标准数据速率以及同步和冻结模式。该模块还支持DP-V1读写功能和报警消息，以及网络状态LED指示灯和符合PROFEUS标准的模块。它支持高达3584字节的输入数据和3584字节的总输出数据速率。

GEFanuc lC695PBM300 PROFIBUS模块的主从兼容性要求使用RX3iCPU和2.9或更高版本的固件。出于配置目的，此模块需要Machine Eidton SP5 逻辑开发人员PLC软件的0.2版或更高版本。IC85PBM300模块的背板电流消耗额定值为440毫安(3.3VDC)，支持所有标准数据速率，包括每秒1.5、3、6、12、9.6、19.2.187.5、93.75和500 MB's。GE FanuclC695PBM300 PROFIEUS主站模块配有一个9针Sub-D连接器，旨在增强总线电缆的安装。该模块还提供3个符合PROFBUs标住的LED指示灯，可显示网络状态和模块状态。

IC695PBM300 GE 主站模块 网络实现数据交换

I0895PBM30 is the FROFEU3 master module of the GEFalnwcARX3i series. This module allows RXiCPU to send and receive data on the PROFBUS-OP network.

Technical specification

Module type :PROFIBUS

Brand: GE

Model: IC695PBM300

Number of master station slots :1(single slot)

Backplane support: Universal

Protocol support: Up to 125 PROFIBUS-DP slave stations

Communication port :RS-232 interface

Internal power :440 MA @3.3 volts DC

The C695BPM300 is a Profibus master station module formerly manufactured by GE Intelligent Platforms (GEIP) and now part of Emerson Automation's PACSystems RX3 Programmable Automation Controller (PAC) family. The module is used for data exchange over Profibus network, with a maximum input data of 3.584 bytes and output data of 3584 bytes. The Profbus master module supports the communication of up to 125 DP slaves, each of which can send 24 bytes of input data and receive 244 bytes of output data.

The C695BPM300 supports all standard data rates, including 9.6kBis, 19.2NBiwts, 93.75kBiis, 187.5 kits, 500 kEits, 1.5 MBtis, 3 MBits, 6 MBts, and 12 MBis. It can provide state information such as slave state bit array table, network diagnostics counter, DP master diagnostics counter, firmware module revision, and slave diagnostics address. It is mounted on the RX3 backplane and supports PC connectivity. Specifically, it must be installed in a universal backplane with a host PACSystem RX9i controller running firmware version 3.2 or higher. It consumes 440 mA@3.3 VDC of backplane current.

The IC695PBM300 PROFIEBUS master station module is manufactured by GE Intelient Platforms(GE Fanuc in the RX3iPacSystens family). The module is designed to enable the PX3iCPU to send or receive data over the PROFIBUS-DP network. It has a socket, supports a universal backplane and RS-232 communication port. The IC695PBM300 PROFIEUS module has an internal current rating of 3 mamp at a rated voltage of 40.3VDC. And supports protocols for up to 125 PROFIEBUS-DP slave station units. Other notable features of the module include support for input data at rates up to 244 bytes per slave cell and output data at rates up to 244 bytes, support for all standard data rates, and synchronization and freezing modes. The module also supports DP-V1 read/write functions and alarm messages, as well as network status leds and PROFEUS compliant modules. It supports up to 3584 bytes of input data and a total output data rate of 3584 bytes.

The master/slave compatibility of the GEFanuc lC695PBM300 PROFIBUS module requires RX3iCPU and firmware version 2.9 or higher. For configuration purposes, this module requires version 0.2 or higher of the Machine Eidton SP5 Logic Developer PLC software. The IC85PBM300 module has a backplane current consumption rating of 440 mA (3.3VDC) and supports all standard data rates, including 1.5, 3, 6, 12, 9.6, 19.2.187.5, 93.75, and 500 MB's per second. The GE FanuclC695PBM300 PROFIEUS master station module comes with a 9-pin Sub-D connector designed to enhance the installation of bus cables. The module also provides 3 LED indicators that conform to the PROFBUs label to show the network status and module status.