IC695CPU310 GE 中央处理器 可编程逻辑控制器

·制造商:GE 

·产品编号: IC695CPU310

产品型号:RX3i VME 300Mhz CPU

·电源要求:+3.3伏直流电:1.25安培标称值，+5伏直流电:1.0安培标称值

·工作温度:0至60摄氏度(32华氏度至140华氏度)

IC695CPU310是 GE Fanuc RX3i系列的300 MHz 中央处理器。IC695CPU310有一个带有10MB RAM和10 MB闪存的Intel Celeron (Pentium IlI)微处理器。它还具有一对用于RS-232和RS-485通信的嵌入式串行端口。两个端口都面向机箱正面，便于使用。IC695CPU310支持三种不同的串行协议(Modbus RTU Slave、SNP和Serial lO) ,它们都与可编程逻辑控制器一起工作，以构建PLC提供信息的方式: IC695CPU310使用SNP Slave协议与HMIl通信(人机界面)设备。

IC695CPU310是GE Fanuc RX3i系列的300 MHz中央处理器。IC695CPU310有一个带有10MB RAM和10 MB闪存的Intel Celeron (Pentium lll)微处理器。它还具有一对用于RS-232和RS-485通信的嵌入式串行端口。两个端口都面向机箱正面，便于使用。IC695CPU310支持三种不同的串行协议(Modbus RTU slave、SNP和Serial l/o)，它们都与可编程逻辑控制器一起工作，以构建PLC提供信息的方式: IC695CPU310使用SNP Slave 协议与HM通信(人机界面)设备。

机箱正面的8个LED让您一目了然地了解系统状态，从而判断CPU、电池和通信通道是否按预期工作。产品文档提醒您LED颜色和状态的含义，但CPU遵循广泛接受的惯例:闪烁或红灯表示系统故障，而稳定的绿色表示正常操作。

双背板总线架构支持RX3i PCI和GE Fanuc系列90-30型串行总线使用。CPU本身最多支持512个程序块，每个程序块的最大大小为128 KB。您可以使用梯形图、结构化文本或功能块图编程语言对其进行编程。您也可以用语言对其进行编程。

IC695CPU310 GE 中央处理器 可编程逻辑控制器

· Manufacturer :GE

· Product ID: IC695CPU310

Product model :RX3i VME 300Mhz CPU

· Power requirements :+3.3 volts DC :1.25 amp nominal value, +5 volts DC :1.0 amp nominal value

· Operating temperature :0 to 60 degrees Celsius (32 to 140 degrees Fahrenheit)

The IC695CPU310 is a 300 MHz CPU from the GE Fanuc RX3i series. The IC695CPU310 has an Intel Celeron (Pentium IlI) microprocessor with 10MB of RAM and 10MB of flash memory. It also has a pair of embedded serial ports for RS-232 and RS-485 communication. Both ports face the front of the chassis for ease of use. The IC695CPU310 supports three different Serial protocols (Modbus RTU Slave, SNP, and Serial lO), all of which work with programmable logic controllers to build the way the PLC provides information: The IC695CPU310 uses the SNP Slave protocol to communicate with the HMIl (human machine interface) device.

The IC695CPU310 is a 300 MHz CPU from the GE Fanuc RX3i series. The IC695CPU310 has an Intel Celeron (Pentium lll) microprocessor with 10MB RAM and 10MB flash memory. It also has a pair of embedded serial ports for RS-232 and RS-485 communication. Both ports face the front of the chassis for ease of use. The IC695CPU310 supports three different Serial protocols (Modbus RTU slave, SNP, and Serial l/o), all of which work with programmable logic controllers to build the way the PLC provides information: The IC695CPU310 uses the SNP Slave protocol to communicate with the HM (human machine interface) device.

Eight leds on the front of the case give you a clear picture of the system status to determine whether the CPU, battery, and communication channels are working as expected. Product documentation reminds you of the meaning of LED color and status, but cpus follow widely accepted conventions: a blinking or red light indicates system failure, while a steady green indicates normal operation.

The dual backplane bus architecture supports RX3i PCI and GE Fanuc series Type 90-30 serial buses. The CPU itself supports up to 512 blocks, each with a maximum size of 128 KB. You can program it using ladder diagram, structured text, or functional block diagram programming languages. You can also program it in a language.