IC695CPE330 GE 控制器  太网连接功能的可编程CFU

规格

部件号IC695CPE330

外形背板

用户内存64MB

I/o32k位离散量I/O，32k字模拟量I/o

能量包可用

冗余支持介质冗余(MRP),PROFINET系统冗余(PNSR)

以太网端口3个10/100/100o (2个交换式端口)

以太网协议SRTP客户端/服务器，Modbus TCP/IP，OPC UA(非透明服务器冗余服务器)，EGD，PROFINET，DNP3电站，IEC-

61850客户端,IEC-104服务器,HART Passthrough

串行协议ASCII 串行协议，Modbus/RTU

远程I/o设备32单工，20冗余，255单工，带PNC001

USB接口1个USB-A 2.0

存储卡1个CFast

环境О至60°℃

机构认证 UKCA，UL,cUL，RoHS,CCC，FCC,Reach，UL HazLoc C1D2，ATEX Zone 2

海事认证ABS,BV，LRDNV GL

该IC5CPE330是GE Fanuc PACSystems RX3I系列中具有以太网连接功能的可编程CFU。要对C695CPE30进行编程和配置，通常使用Profcy Machine Eidtion软件。

该模块是支持其他RX3iIIO和智能选件模块的控制器。它的CPU最多可容纳512个程序块，每个程序块的容量可达128KB.

IC695CPE330附带84MB用户内存、6A MB程宓内存和一对标记为LAN1和LAN2的独立高速以太网LAN,LAV1使用专用的RL-45(有时写成RU45)连接器。LANV2使用一对内部开关连接器。两个LAN都由专用的微处理器和网络接口控制器提供服务，因此所涉及的以太网独立于控制器逻辑和MO扫描运行。控制器上的以太网接口可自动检测数据速率、通信模式和布线布置.

两个LAN中的每一个部可以同时运行多达48个SRTP(安全实时传输协议）服务器连接。该控制器支持三种不同的串行协议: Modbus RTU Slave、Serial lO和SNP Slave,

控制器金属外壳上的切口和面板上的标签使连接和布线选项—目了然。该控制器旨在同步数据，同时实现多层通信。它还允许您在USB 2.0可移动数据存储设备之间传输数据。

特点·IC695CPE330基于标签的编程等编程工具，可重用代码库，可改进在线故障排除

的测试编辑模式

·IC695CPE330用户友好环境,可提高设计灵活性并提高工程效率和生产率·支持PROFINET的设备增加即插即用功能，便于安全地连接机

器、数据和人员

·高速多核处理器，可提高吞吐量，无任何信息瓶颈

·支持高密度离散量I/o模块、通用模拟量模块(每个通道均可配置TC、RTD、应变仪、电压和电流）、隔离模拟量模块、高密度模拟量模块、高速计数器和运动模块

。支持高密度离散I/O模块、通用模拟量模块(每个通道均可配置TC、RTD、应变仪、电压和电流)、隔离模拟量模块、高密度模拟量模块、高速计数器和运动模块

IC695CPE330 GE 控制器  太网连接功能的可编程CFU

specification

Part number IC695CPE330

Contour backplane

User memory 64MB

I/o32k bit discrete I/O, 32k word analog I/O

Energy pack availability

Redundancy Support Medium Redundancy (MRP),PROFINET System Redundancy (PNSR)

Ethernet port 3 10/100/100o (2 switching ports)

Ethernet Protocol SRTP client/server, Modbus TCP/IP, OPC UA(Non-Transparent Server Redundant Server), EGD, PROFINET, DNP3 power Station, IEC-

61850 client,IEC-104 server,HART Passthrough

Serial Protocol ASCII Serial protocol, Modbus/RTU

Remote I/o device 32 simplex, 20 redundant, 255 simplex, with PNC001

USB port One USB-A 2.0

Memory card 1 CFast

The environment ranges from 60° C to 60° C

Agency certification UKCA, UL,cUL, RoHS,CCC, FCC,Reach, UL HazLoc C1D2, ATEX Zone 2

Maritime Certification ABS,BV, LRDNV GL

The IC5CPE330 is a programmable CFU with Ethernet connectivity in GE Fanuc PACSystems RX3I series. To program and configure the C695CPE30, Profcy Machine Eidtion software is typically used.

This module is the controller that supports other RX3iIIO and smart option modules. Its CPU can hold up to 512 blocks, each with a capacity of up to 128KB.

The IC695CPE330 comes with 84MB of user memory, 6A MB of program memory, and a pair of separate high-speed Ethernet Lans labeled LAN1 and LAN2, with the LAV1 using a dedicated RL-45(sometimes written as RU45) connector. The LANV2 uses a pair of internal switch connectors. Both Lans are served by dedicated microprocessors and network interface controllers, so the Ethernet involved operates independently of controller logic and MO scanning. The Ethernet interface on the controller automatically detects data rates, communication modes, and cabling arrangements.

Each part of the two Lans can run up to 48 SRTP(Secure Real-Time Transport Protocol) server connections simultaneously. The controller supports three different Serial protocols: Modbus RTU Slave, Serial lO, and SNP Slave.

Notches in the controller's metal housing and labels on the panel make connection and wiring options clear. The controller is designed to synchronize data while enabling multi-layer communication. It also allows you to transfer data between USB 2.0 removable data storage devices.

· Programming tools such as IC695CPE330 label-based programming, reusable code base for improved online troubleshooting

Test edit mode

·IC695CPE330 User friendly environment for increased design flexibility and increased engineering efficiency and productivity · ProFINET-enabled devices add plug-and-play functionality for easy and secure machine connection

Machines, data and people

· High-speed multi-core processor to improve throughput without any information bottleneck

· Supports high-density discrete I/o modules, universal analog modules (TC, RTD, strain gauge, voltage and current can be configured per channel), isolated analog modules, high-density analog modules, high-speed counters and motion modules

. Supports high-density discrete I/O modules, universal analog modules (TC, RTD, strain gauge, voltage and current can be configured per channel), isolated analog modules, high-density analog modules, high-speed counters and motion modules