IC693CPU374 GE 可编程逻辑控制器 自动感应功能

制造商:GE

产地∶美国制造

型号：IC693CPU374

IC693CPU374是阿格Fanuc公司90-30系列的可编程逻辑控制器(PLC)模块。该模块是一个处理器模块，用于托管用户程序、执行逻辑和管理通过嵌入式通信端口与处理器之间的数据交换。

IC693CPU374CPU采用AMD SC520类型的80386EX处理器，并具有2个内置以太网端口，允许10/100 base-T/TX通信。特色以太网端口通过RJ-45连接器连接。该装置还支持电源上的RS-485端口，并允许通过SNP和SNPX协议进行通信。除此之外，该设备还支持几种常用的程序存储设备。

。一般:GE Fanuc IC693CPU374是一款单插槽CPU模块，处理器速度为133 MHz。该模块嵌入了以太网接口。

·内存: IC53CPU374使用的用户内存总星为240KB。与用户程序存储器相关的实际大小主要取决于配置的存储器关型，例如离存器存情N〈%R)、模拟输入、(%A）和棋拟输出(%A0)。为每种内存类型配置的内存量为128到大约32,640个字。

。功率:IC693CPU374所需的功率为7.4V直流电压tage.它还支持供电时的RS-5端口。当通过此端口供电时，此模块支持协议SNP和SNPX

。操作:该模块在0℃至60℃的环境温度范围内运行。储存所需的温度在-40°C至+85°C之间。

。特点:12698CPU374配备了两个以太网端口，都具有自动感应功能。该模块每个系统有八个底板，包括一个CPU底板。其余7个是扩展或远程底板，与可编程通信

协处理器兼容。

。电池:IC93CPU374模块的备用电池可以运行几个月。内置电池可作为电源长达1.2个月，可选的外部电池可支持模块长达12个月。

IC693CPU374 GE 可编程逻辑控制器 自动感应功能

Manufacturer :GE

Origin: Made in USA

Model: IC693CPU374

IC693CPU374 is a programmable logic controller (PLC) module in the 90-30 series of AgFANuc. The module is a processor module that hosts user programs, executes logic, and manages the data exchange with the processor via an embedded communication port.

The IC693CPU374CPU uses an 80386EX processor of AMD SC520 type and has 2 built-in Ethernet ports that allow 10/100 base-T/TX communication. Featured Ethernet ports are connected through RJ-45 connectors. The device also supports an RS-485 port on the power supply and allows communication via SNP and SNPX protocols. In addition, the device also supports several commonly used program storage devices.

. General: The GE Fanuc IC693CPU374 is a single-slot CPU module with a processor speed of 133 MHz. The module is embedded with an Ethernet interface.

· Memory: The total user memory used by IC53CPU374 is 240KB. The actual size associated with the user program memory depends mainly on the configured memory level, such as memory memory N < %R), analog input, (%A), and simulated output (%A0). The amount of memory configured for each memory type ranges from 128 to approximately 32,640 words.

. Power :IC693CPU374 requires a 7.4V DC voltage tage. It also supports an RS-5 port when powered. When powered through this port, this module supports protocols SNP and SNPX

. Operation: The module operates in the ambient temperature range of 0 ° C to 60 ° C. The temperature required for storage is between -40°C and +85°C.

. Features: The 12698CPU374 is equipped with two Ethernet ports, both with automatic sensing. The module has eight backboards per system, including a CPU backboard. The remaining seven are extended or remote baseboards that communicate with programmability

Coprocessor compatible.

. Battery: The backup battery of the IC93CPU374 module can run for several months. The built-in battery can be used as a power source for up to 1.2 months, and an optional external battery can support the module for up to 12 months.