DS200PCCAG1ABB GE PCCA电源连接卡 接口板

零件编号:DS200PCCAG1ABB

系列:马克五世

制造者:GE工业控制系统

产品类型:PCCA电源连接卡

说明书:GEl-100161

电枢电压:再生，240-630伏

重量:1磅

运输尺寸:18x 12 x 12英寸

原产国:美国

DS2OOPCCAG1ABB PCCA电源连接卡用作SCR和驱动器控制电路之间的接口板。有关DS2QOPCCAG1ABB的信息，请参阅GE工业控制系统使用手册GE-100161A和GE1-100161B。该板是基准DS20OPCCAG1模型的“ABB”修订版，是G1组编号。G1组号意味着该PCCA板是可再生的，电枢电压范围为240-630伏.

该DS20OPCCAG1ABB有四个可配置跳线，分别位于JP1、JP2、WP3和WP4。当设置为特定于应用的配置时，如果缓冲电容器连接到电源桥，则这些跳线会通知驱动器，该电源桥与电压反馈通道位于同一点。跳线的具体用途如下:

· JP1选择直流电枢电压范围

· JP2与JP1一起使用以选择直流电枢电压范围. wP3设置为配置缓冲器和电压反馈连接状态. WP4 还用于指示缓冲器和电压反馈通道连接

DS20OPCCAG1ABB是PCCA电源连接卡G1组中常用的主板，通常在全新和翻新条件下提供，并且在大多数情况下是可维修的。

GE DS200PCCAG1ABB发电机保护系统模块具有控制功能，可以实现发电机的启动、停止和调速等控制操作。GE DS200PCCAG1ABB产品详情:

发电机保护:DS2OOPCCAG1ABB模块用于发电机的保护功能，包括过电流保护、过电压保护、过频率保护等，确保发电机在运行过程中的安全和稳定。

控制功能:除了发电机保护功能外，该模块还具有控制功能，可以实现发电机的启动、停止和调速等控制操作。

高可靠性:作为发电机保护系统的一部分，DS20OPCCAG1ABB模块采用了可靠的工业级组件和设计，具有高可靠性和稳定性。通信接口∶模块通常具有多种通信接口，可以与其他控制系统进行数据交换和通信，实现集成控制和监测。

可编程:DS200PCCAG1ABB模块可以进行编程和参数设置，根据实际应用需求进行灵活配置和定制。

适用范围:该模块广泛应用于发电厂、电力站和工业领域，用于发电机保护和控制，确保发电机的安全和稳定运行。

DS200PCCAG1ABB GE PCCA电源连接卡 接口板

Part number :DS200PCCAG1ABB

Series: Mark V

Manufacturer :GE Industrial Control Systems

Product type :PCCA power card

Instruction manual :GEl-100161

Armature voltage: Regenerative, 240-630 volts

Weight :1 lb

Shipping dimensions :18x 12 x 12 inches

Country of origin: USA

The DS2OOPCCAG1ABB PCCA power connection card is used as the interface board between the SCR and the driver control circuit. For information about the DS2QOPCCAG1ABB, see the GE Industrial Control System User manuals GE-100161A and GE1-100161B. This board is an "ABB" revision of the benchmark DS20OPCCAG1 model and is group G1 number. The G1 group number means that the PCCA board is renewable and has an armature voltage range of 240-630 volts.

The DS20OPCCAG1ABB has four configurable jumpers located at JP1, JP2, WP3 and WP4. When set to an application-specific configuration, these jumpers notify the driver if the buffer capacitor is connected to a power bridge that is located at the same point as the voltage feedback channel. The specific uses of jumpers are as follows:

· JP1 Select DC armature voltage range

· JP2 is used with JP1 to select DC armature voltage range. wP3 is set to configure buffer and voltage feedback connection state. WP4 is also used to indicate buffer and voltage feedback channel connections

The DS20OPCCAG1ABB is a commonly used motherboard in the G1 group of PCCA power connection cards, usually supplied in new and refurbished conditions, and in most cases repairable.

The GE DS200PCCAG1ABB generator protection system module has the control function, which can realize the generator start, stop and speed control operation. GE DS200PCCAG1ABB Product Details:

Generator protection :DS2OOPCCAG1ABB module is used for the protection function of the generator, including over-current protection, over-voltage protection, over-frequency protection, etc., to ensure the safety and stability of the generator during operation.

Control function: In addition to the generator protection function, the module also has a control function, which can realize the generator start, stop and speed control operation.

High reliability: As part of the generator protection system, the DS20OPCCAG1ABB module uses reliable industrial grade components and design for high reliability and stability. Communication interface: The module usually has a variety of communication interfaces, which can exchange data and communicate with other control systems to achieve integrated control and monitoring.

Programmable :DS200PCCAG1ABB module can be programmed and parameter set, flexible configuration and customization according to actual application requirements.

Scope of application: The module is widely used in power plants, power stations and industrial fields for generator protection and control to ensure the safe and stable operation of generators.