DS200SSBAG1 GE通用电气电路板 具有三根连接到板上组件的电线

DS200SSBAG1  GE通用电气电路板 具有三根连接到板上组件的电线

DS200SSBAG1 技术规格

制造者 通用电气通用电气

系列 马克五世

部件号 DS200SSBAG1

产品类型 缓冲卡

产品描述

GE DC300 驱动器缓冲板 DS200SSBAG1 具有一个 2 针连接器、3 个电容器和四个用于连接电缆的柱。 GE DC300 驱动器缓冲板 DS200SSBAG1 具有三根连接到板上组件的电线。更换主板时，请将电路板并排放置在静态保护袋上，并确保电缆连接到更换板上的相同端子。松开端子并移动它们，使电路板相同。使用印在电路板上的 ID 来识别连接器。电缆上的绝缘层颜色标识电缆。

DS200SSBAG1电路板上的一个端子连接到驱动器中另一个组件的电线上。端子在板上印有 ID，做法是将连接器 ID 写在标签上并将其粘贴到电缆上。此信息也适用于电路板上的 2 针连接器。记下 ID 并将其粘贴到电缆上，然后再断开连接。首先，断开电缆与 2 针连接器的连接，并断开一根电线与连接到驱动器中另一个组件的端子的连接。使用螺丝刀卸下将主板固定在驱动器中的螺钉，并确保将螺钉固定在安全的地方。如果还存在垫圈，请也保留它们。

The GE DC300 driver buffer board DS200SSBAG1 has a 2-pin connector, 3 capacitors, and four columns for connecting cables. The GE DC300 driver buffer board DS200SSBAG1 has three wires connected to the components on the board. When replacing the motherboard, place the circuit board side by side on a static protection bag and ensure that the cables are connected to the same terminals on the replacement board. Release the terminals and move them so that the circuit board is the same. Use the ID printed on the circuit board to identify the connector. The color of the insulation layer on the cable identifies the cable.

One terminal on the DS200SSBAG1 circuit board is connected to the wire of another component in the driver. The terminal is printed with an ID on the board by writing the connector ID on the label and pasting it onto the cable. This information also applies to 2-pin connectors on circuit boards. Record the ID and paste it onto the cable before disconnecting it. Firstly, disconnect the cable from the 2-pin connector and disconnect a wire from the terminal connected to another component in the driver. Use a screwdriver to remove the screws that secure the motherboard to the drive and ensure that the screws are secured in a safe place. If there are still washers, please keep them as well.

有关 DS200SSBAG1 的常见问题

DS200SSBAG1 与哪种硬盘配合使用？

DS200SSBAG1 与 DC300 和 DC2000 驱动器配合使用。

DS200SSBAG1有多少个电容器？

DS200SSBAG1有三个电容。DS200SSBAG1的电容器标记为MOV1-MOV3。