DS200SSBAG1B GE马克电气驱动器缓冲板

DS200SSBAG1B  GE马克电气驱动器缓冲板

DS200SSBAG1B 技术规格

制造者 通用电气通用电气

系列 马克五世

部件号 DS200SSBAG1B

产品类型 缓冲卡

产品描述

GE DC300 驱动器缓冲板 DS200SSBAG1B 具有一个 2 针连接器、3 个电容器和四个用于连接电缆的柱。在开始更换过程之前，请记住以下信息。只有合格的维修商才能执行更换，因为驱动器在运行时存在大电流。服务人员应了解危险和指南，以尽量减少安全隐患。检查驱动器周围的区域并清除未接地的电线区域，因为它们存在电击危险。此外，由于电击危险，清除地板上的任何水分、水坑或水。清除服务人员可能绊倒的碎片区域也是一种很好的做法。重要的考虑因素是服务人员永远不应该单独工作。这是在存在紧急情况时有人在附近，如果可能的话，员工可以寻求帮助或提供援助。此外，员工可以协助更换程序。

在接触内部组件之前，必须去除驱动器上的所有电压。为此，请咨询熟悉驱动器及其在现场安装方式的人员。最佳做法是通过从电源上卸下保险丝或以其他方式将其脱机来禁用电源。使用测试设备测试驱动器中的电源。某些组件即使在电源断电后也能存储电流。等待几秒钟，让组件通电，然后再测试驱动器。

The GE DC300 driver buffer board DS200SSBAG1B has a 2-pin connector, 3 capacitors, and four columns for connecting cables. Before starting the replacement process, please remember the following information. Only qualified repairers can perform replacement because there is high current in the drive during operation. Service personnel should be aware of hazards and guidelines to minimize safety hazards. Check the area around the drive and remove ungrounded wire areas as they pose a risk of electric shock. In addition, due to the danger of electric shock, remove any moisture, puddles or water from the floor. It is also a good practice to remove debris areas that service personnel may stumble over. An important consideration is that service personnel should never work alone. This is when there is an emergency situation where someone is nearby and if possible, employees can seek help or provide assistance. In addition, employees can assist in changing procedures.

Before touching internal components, all voltage on the driver must be removed. For this, please consult personnel familiar with the drive and its on-site installation method. The best practice is to disable the power supply by removing the fuse from the power supply or taking it offline in other ways. Use testing equipment to test the power supply in the drive. Some components can store current even after a power outage. Wait a few seconds for the components to power up before testing the drive.

DS200SSBAG1B 常见问题

DS200SSBAG1B 有什么样的端子连接器？

DS200SSBAG1B 具有 2 针 FCPL 端子连接器。

DS200SSBAG1B有多少个电容器？

DS200SSBAG1B有三个电容。DS200SSBAG1B上的电容标记为MOV1-MOV3。