8724-CA-PS GE 光纤接口板 控制现场总线进行通信

部件号:8724-CA-PS

GE8724-CA-PS光纤接口板产品详情:

光纤接口板是—种用于连接光纤通信设备的关键组件。它通常包括光纤连接器、接口电路和适配器，用于将光信号传输到不同的光纤设备之间。这些接口板在各种通信和数据传输应用中广泛使用，包括网络通信、数据中心、电信、广播、医疗设备等。

以下是光纤接口板的一些关键特点和用途:

特征·PAc800o 1/O是一种完全模块化的I/O解决方案，适用于通用和危

险区域应用。 它提供了各种各样的I/O功能，并具有开放式架构，允许通过选择适当类型的总线接口模块（BIM）或控制器与各种不同的现场总线进行通信。

现场端子(每个IO模块一个)卡入托架并接受现场接线，无需额外的端子或连接。 如果在现场损坏，可以轻松更换。 全面的机械键控系统可确保维护设备安全。

载体通过安装在平板或T型或G型截面DIN 导轨上来形成

PAC8000的物理和电气主干。 它们支持和互连BIM或控制器、电源、IO模块和现场终端，并承载内部铁路客车的地址、数据和电源线.

8724-CA-PS特点和功能:

光纤连接器:光纤接口板通常配备不同类型的光纤连接器，如SC、LC、ST、MTP/MPO等，以便与不同类型的光纤连接设备兼容。

光纤接口类型:光纤接口板可以是光纤输入(RX)和光纤输出(TX）类型，用于将光信号传输到或接收自光纤网络中。

多模和单模:根据应用需求，光纤接口板可以支持多模光纤（(用于短距离通信）或单模光纤（用于长距离通信)。

光信号速率:这些接口板可以支持不同的光信号速率，包括千兆比特/秒(Gbps). 十Gbps、四十Gbps、一百Gbps甚至更高。

协议兼容性:光纤接口板通常支持不同的通信协议，如以太网、光纤通道(FC)、光纤分布式数据接口(FDDI)等。

8724-CA-PS GE 光纤接口板 控制现场总线进行通信

Part number :8724-CA-PS

GE8724-CA-PS Fiber Interface Board Product Details:

The optical fiber interface board is a key component used to connect optical fiber communication devices. It typically includes fiber optic connectors, interface circuits, and adapters for transmitting optical signals between different fiber optic devices. These interface boards are widely used in a variety of communications and data transmission applications, including network communications, data centers, telecommunications, broadcasting, medical devices, and more.

The following are some key features and uses of the fiber interface board:

The PAc800o 1/O is a fully modular I/O solution for both general purpose and critical applications

Dangerous area application. It offers a wide variety of I/O functions and has an open architecture that allows communication with a variety of different fieldbuses by selecting the appropriate type of bus interface module (BIM) or controller.

Field terminals (one per IO module) are inserted into the tray and accept field wiring without additional terminals or connections. If damaged in the field, it can be easily replaced. A comprehensive mechanical keying system ensures the safety of maintenance equipment.

The carrier is formed by mounting on a flat plate or T - or G-section DIN rail

Physical and electrical backbone of the PAC8000. They support and interconnect BIM or controllers, power supplies, IO modules and field terminals, and carry the addresses, data and power lines of the internal rail passenger cars.

8724-CA-PS Features and functions:

Optical fiber connector: The optical fiber interface board is usually equipped with different types of optical fiber connectors, such as SC, LC, ST, MTP/MPO, etc., so that it is compatible with different types of optical fiber connection devices.

Fiber interface type: The fiber interface board can be of the fiber input (RX) and fiber output (TX) types, and is used to transmit optical signals to or receive optical signals from the fiber network.

Multi-mode and single-mode: Depending on the application requirements, the fiber interface board can support multi-mode fiber (for short-distance communication) or single-mode fiber (for long-distance communication).

Optical signal rate: These interface boards can support different optical signal rates, including gigabits per second (Gbps). Ten Gbps, forty Gbps, one hundred Gbps and even higher.

Protocol compatibility: The Fiber interface board usually supports different communication protocols, such as Ethernet, Fibre Channel (FC), and Fiber Distributed Data Interface (FDDI).