DS200SLCCG1AFG 通用电气Mark V Speedtronic通讯卡

DS200SLCCG1AFG 通用电气Mark V Speedtronic通讯卡

DS200SLCCG1AFG 技术规格

制造者：通用电气通用电气

系列：马克五世

部件号：DS200SLCCG1AFG

产品类型：印刷电路板

产品描述

DS200SLCCG1AFG 替代 LAN 通信板。该板设计用于GE的Mark V涡轮机控制系统，旨在控制和管理工业燃气和蒸汽轮机系统。MK V 控制系统可以设置为单工或 TMR（三重模块化冗余）系统。客户必须知道DS200SLCC板通常不包括位于U6和U7 EPROM中的软件，因为板子里这些插槽是空的。如果您不打算从旧主板上移除 EPROM 以移至新主板，请订购带有 EPROM 的替换板（DS215 级别）。

DS200SLCCG1AFG 板可安装到 SDCC 板上的支架上，并通过 KPPL 连接器与该卡上的键盘连接。 

DS200SLCCG1AFG 具有平行于一个边缘的 16 位字母数字显示屏。该显示器末端附近有四个柱子（ST1 到 ST4），用于保护其玻璃尖端。这些帖子看起来像跳线，但不应与位于板上其他地方的跳线混淆。可以修改跳线设置以更改RS-422 DLAN驱动程序或隔离DLAN电路。此外，J19 跳线用于将晶体连接到处理器。其他跳线设置可在相关手册和用户指南中的表格中找到。

DS200SLCCG1AFG replaces the LAN communication board. This board is designed for use in GE's Mark V turbine control system, aimed at controlling and managing industrial gas and steam turbine systems. The MK V control system can be set as a simplex or TMR (Triple Modular Redundancy) system. Customers must be aware that DS200SLCC boards typically do not include software located in U6 and U7 EPROMs, as these slots in the board are empty. If you do not plan to remove the EPROM from the old motherboard to move to the new motherboard, please order a replacement board with EPROM (DS215 level).

The DS200SLCCG1AFG board can be installed on a bracket on the SDCC board and connected to the keyboard on the card through a KPPL connector.

DS200SLCCG1AFG has a 16 digit alphanumeric display screen parallel to one edge. There are four pillars (ST1 to ST4) near the end of the display to protect its glass tip. These posts look like jumpers, but they should not be confused with jumpers located elsewhere on the board. You can modify the jumper settings to change the RS-422 DLAN driver or isolate the DLAN circuit. In addition, the J19 jumper is used to connect the crystal to the processor. Other jumper settings can be found in tables in relevant manuals and user guides.