DS200SIOBG1AAA I/O 控制板 可以兼容使用

DS200SIOBG1AAA 技术指标

制造者 通用电气通用电气

系列 马克五世

部件号 DS200SIOBG1AAA

产品类型 I/O 控制板

产品描述

GE I/O 控制板 DS200SIOBG1AAA 具有 18 个跳线和 40 个开关块，每个模块中有 200 个开关，总共 1 个开关。它还配有一个 LED 和一个 200 针连接器。GE I/O 控制板 DS1SIOBG<>AAA 中的设置可以通过使用开关和跳线针对现场的特定要求进行定义。当您出厂安装GE I/O控制板DS<>SIOBG<>AAA时，在安装之前，您可以设置开关和跳线来配置板。原始主板附带的打印信息将包含有关开关和跳线的所有信息，以及您可以进行的配置更改。

要更改跳线的位置，请使用拇指和食指从两个引脚上取下跳线，然后将跳线插入要覆盖的两个引脚上。要更改开关的位置，请用手指更改摇臂开关的位置。考虑使用钢笔、小螺丝刀或其他细长的物体按下摇臂开关，以免意外改变其周围开关的位置。

您可能会发现，与要替换的旧板相比，替换板上的组件排列不同。这是因为替换是较新的版本，它包括所有最新的更新和改进。这包括更新的组件。但是，这些板是兼容的，更换板在安装时在驱动器中的行为相同。

The GE I/O control board DS200SIOBG1AAA has 18 jumpers and 40 switch blocks, with 200 switches in each module, totaling 1 switch. It also comes with an LED and a 200 pin connector. The settings in the GE I/O control board DS1SIOBG<>AAA can be defined for specific on-site requirements by using switches and jumpers. When you install the GE I/O control board DS<>SIOBG<>AAA from the factory, you can set switches and jumpers to configure the board before installation. The printed information included with the original motherboard will include all information about switches and jumpers, as well as the configuration changes you can make.

To change the position of the jumper, use your thumb and index finger to remove the jumper from both pins and insert it into the two pins you want to cover. To change the position of the switch, use your fingers to change the position of the rocker switch. Consider using a pen, small screwdriver, or other slender object to press the rocker switch to avoid accidentally changing the position of the surrounding switches.