DS200SHVMG1AED 接口板 可提供许多电压和转换功能

DS200SHVMG1AED 技术规格

制造者 通用电气通用电气

系列 马克五世

部件号 DS200SHVMG1AED

产品类型 可控硅高压M型框架接口板

产品描述

通用电气DS200SHVMG1AED是一款可控硅高压M型框架接口板。该卡是为 Mark V 系列可选和替换板开发的。作为该系列的一员，该接口板可轻松安装在各种GE品牌驱动器和励磁器上。安装卡后，用于将 SCR 桥与 M 框架驱动器和 DCFB 或 SDCI 板以及电源连接卡或 PCCA 中的电源连接在一起的介质。

通过将DS200SHVMG1AED板安装到驱动器中，可提供许多电压和转换功能。该卡转换 -0 至 500 mV 之间的分流信号，产生 500 至 500 kHz 的差分频率输出。这些信号的所有转换均由压控振荡器（VCO）电路中的直流正负浮动分流器执行。转换后，差分频率输出被发送到DCFB/SDCI板或PCCA卡。板上的交流线路电流提供 10：1 的电流互感器衰减。板载有 17 个可配置跳线，允许用户选择衰减率。

General Electric DS200SHVMG1AED is a thyristor high-voltage M-type frame interface board. This card was developed for the Mark V series optional and replacement boards. As a member of this series, this interface board can be easily installed on various GE brand drives and exciters. The medium used to connect the SCR bridge with the M-frame drive, DCFB or SDCI board, as well as the power supply in the power connection card or PCCA after installing the card.

By installing the DS200SHVMG1AED board into the drive, many voltage and conversion functions can be provided. The card converts a shunt signal between -0 and 500 mV, generating a differential frequency output of 500 to 500 kHz. All conversions of these signals are performed by a DC positive and negative floating shunt in the voltage controlled oscillator (VCO) circuit. After conversion, the differential frequency output is sent to the DCFB/SDCI board or PCCA card. The AC line current on the board provides a 10:1 current transformer attenuation. The board contains 17 configurable jumpers, allowing users to choose the attenuation rate.

DS200SHVMG1AED 常见问题

DS200SHVMG1AED 的首字母缩略词是什么？

与DS200SHVMG1AED和其他DS200SHVM SCR高压m框架接口板相关的首字母缩写是SHVM。

DS200SHVMG1AED 的电源是什么？

DS200SHVMG1AED 通过来自 DS200SHVMG1AED M 机架驱动 SCR 桥接器的信号为 DCFB 或 SDCI 电源板和 PCCA 电源连接卡供电。

只有一个版本的 SHVM 板 - 版本 G1。DS200SHVMG1AED 是 G1 版本，如 DS1SHVMG200AED 型号中的“G1”所示。