DS200SHVIG1BDH 通用电气的Mark V板系列 SCR高压接口板

DS200SHVIG1BDH  通用电气的Mark V板系列 SCR高压接口板

DS200SHVIG1BDH 技术规格

制造者 通用电气通用电气

系列 马克五世

部件号 DS200SHVIG1BDH

产品类型 可控硅高压接口板

产品描述

DS200SHVIG1BDH是为通用电气的Mark V板系列开发的高压接口板。该卡可轻松安装到GE品牌的许多励磁器和驱动器中。安装该板时，驱动器的 SCR 桥和电源板之间的接口可用。 此卡可促进驱动器的集成仪表卡、电源连接卡和电源之间的通信。

源向驱动器的电压信号通过该板，并作为系统可消化信号发送出去。DS200SHVIG1BDH可转换-500至500 mV的输入电压信号。一旦发送到电路板，这些电压就会变成0至500 kHz的差分频率。然后，这些新的频率信号由卡发送到驱动器的电源卡。该卡本身包括 10 个用户可配置跳线。每个跳线包括一个 1：<> 电流互感器。这些跳线还为用户提供了额外的衰减能力。如果任何滤波器熔断集成到电路板中，三个板载 LED 指示灯会直观地提醒用户。

DS200SHVIG1BDH is a high-voltage interface board developed for General Electric's Mark V board series. This card can be easily installed into many GE branded exciters and drivers. When installing the board, the interface between the SCR bridge of the driver and the power board is available. This card can facilitate communication between the integrated instrument card, power connection card, and power supply of the driver.

The voltage signal from the source to the driver passes through the board and is sent out as a system digestible signal. DS200SHVIG1BDH can convert input voltage signals from -500 to 500 mV. Once sent to the circuit board, these voltages will become differential frequencies ranging from 0 to 500 kHz. Then, these new frequency signals are sent from the card to the power card of the driver. The card itself includes 10 user configurable jumpers. Each jumper includes a 1:<>current transformer. These jumpers also provide users with additional attenuation capability. If any filter is fused and integrated into the circuit board, three onboard LED indicators will visually remind the user.

关于DS200SHVIG1BDH的常见问题

DS200SHVIG1BDH 上有多少盏灯？

DS200SHVIG1BDH 有 3 个指示灯。DS200SHVIG1BDH 上的指示灯可直观地指示 DS200SHVIG1BDH 上的熔线滤波器保险丝。

DS200SHVIG1BDH 的首字母缩略词是什么？

DS200SHVIG1BDH的首字母缩写是SHVI，意思是DS200SHVIG1BDH是SCR高压接口板。