DS200SIOBH1A GE虚拟机支架 I/O 卡 用于将信号从电路板传输

DS200SIOBH1A   GE虚拟机支架 I/O 卡  用于将信号从电路板传输

DS200SIOBH1A 技术指标

制造者 通用电气通用电气

系列 马克五世

部件号 DS200SIOBH1A

产品类型 虚拟机支架 I/O 卡

产品描述

GE I/O 控制板 DS200SIOBH1A 具有 3 个跳线和 6 个开关块，每个模块中有 18 个开关，总共 40 个开关。它还装有一盏 LED 灯和一个 200 针连接器。GE I/O 控制板 DS1SIOBH<>A 上的一些连接器可以通过带状电缆同步和连接。带状电缆带有多根小线，用于将信号从电路板传输到驱动器中的其他组件。带状电缆中的其他电线承载由电路板接收的信号进行处理。带状电缆保持良好状态至关重要，这样才能传输信号。为此，您必须遵循一些准则。如果尝试通过握住DS200SIOBH1A电缆的带状部分来拉出带状电缆，则可能会断开带状电缆和塑料连接器之间的连接。做法是用一只手牢牢抓住塑料连接器，然后将其从板上的连接器中牢固地拉出。

您必须注意电缆在驱动器内部的布线方式，因为它携带的信号可能会受到电流的干扰。通过将电缆布线远离承载电流的电缆，您可以防止干扰。电缆布线还会阻塞对冷却很重要的适当气流。驱动器中的组件产生热量，气流用于带走热量。

The GE I/O control board DS200SIOBH1A has 3 jumpers and 6 switch blocks, with 18 switches in each module, totaling 40 switches. It is also equipped with an LED light and a 200 pin connector. Some connectors on the GE I/O control board DS1SIOBH<>A can be synchronized and connected through ribbon cables. The ribbon cable comes with multiple small wires used to transmit signals from the circuit board to other components in the driver. The other wires in the ribbon cable carry signals received by the circuit board for processing. It is crucial to maintain a good condition of the ribbon cable in order to transmit signals. To do this, you must follow some guidelines.

 If you try to pull out the ribbon cable by gripping the ribbon portion of the DS200SIOBH1A cable, it may disconnect the connection between the ribbon cable and the plastic connector. The method is to firmly grasp the plastic connector with one hand and then pull it out of the connector on the board.

You must pay attention to the wiring method of the cable inside the drive, as the signal it carries may be affected by current interference. By routing cables away from cables carrying current, you can prevent interference. Cable routing can also block appropriate airflow that is important for cooling. The components in the drive generate heat, and the airflow is used to carry away the heat.