IC693ALG223 16通道，单端模拟输入模块

【功能描述】

GE Fanuc系列90-30可编程逻辑控制器(PLC)模块目录号IC693ALG223是一个16通道，单端模拟输入模块，用于连接现场设备和仪表，提供模拟信号作为过程变量测量的表示。具体来说，IC693ALG223的每个通道可配置接收0- 20ma、4- 20ma和4- 20ma的增强信号。能够提供这些信号的一些设备是变送器，变频驱动器(VFD)速度反馈，数据记录仪，面板仪表和其他设备。

IC693ALG223为单槽位模块，可安装在系列90-30的5槽位或10槽位底板的任意槽位上。根据安装的控制器不同，IC693ALG223支持的实例数也不同。对于311型，313型和323型系统，最多可兼容四(4)个模块实例。对于331型系统，8(8)个模块，12(12)型340和341系统和51型351和352系统。

IC693ALG223具有12位分辨率，所有16个通道的更新率为13毫秒，绝对精度为±0.25%的满量程@ 25摄氏度(77华氏度):在指定的工作温度范围内，满量程的±0.5%，线性度< 1 LSB从4到20 mA, 4到20 mA范围和< 1 LSB从100µA到20 mA, 0到20 mA和4到20 mA增强范围。该模块在场侧和逻辑侧之间具有1500伏的隔离能力。

IC693ALG223 16通道模拟输入模块具有200赫兹的输入滤波器响应和250欧姆的输入阻抗。系统中可安装的模拟电流输入模块的最大数量为:CPU 311、313、323为4个，CPU 331为8个，CPU 340、341为12个。它具有高水平的分辨率和精度来处理非常敏感的模拟信号。它可以接收来自各种传感器的模拟输入，如液位传感器、流量传感器和温度传感器。每个通道的精度在4到20毫安电流范围内分辨率为4微安，在0到20毫安电流范围内分辨率为5微安，在4到20增强毫安电流范围内分辨率为5微安。它使用外部电源，电压范围为20至30伏直流和10%供电电压纹波。该模块旨在支持广泛的工业信号

IC693ALG223 16通道，单端模拟输入模块

The GE Fanuc Series 90-30 Programmable Logic Controller (PLC) module catalog number IC693ALG223 is a 16-channel, single-ended analog input module for connecting field devices and meters, providing analog signals as a representation of process variable measurements. Specifically, each channel of IC693ALG223 can be configured to receive 0-20ma, 4-20ma, and 4-20ma enhanced signals. Some devices capable of providing these signals are transmitters, variable frequency drivers (VFD) speed feedbacks, data loggers, panel meters, and other devices.

The IC693ALG223 is a single-slot module that can be installed in any slot of the 5-slot or 10-slot baseplate of Series 90-30. The number of instances supported by IC693ALG223 varies depending on the controller you install. For Type 311, Type 313, and Type 323 systems, up to four (4) module instances are compatible. For Type 331 systems, 8(8) modules, 12(12) Type 340 and 341 systems and 51 Type 351 and 352 systems.

IC693ALG223 has a 12-bit resolution with an update rate of 13 ms for all 16 channels and an absolute accuracy of ±0.25% full scale @ 25 degrees Celsius (77 degrees Fahrenheit): ±0.5% of full scale, within the specified operating temperature range. Linearity < 1 LSB from 4 to 20 mA, 4 to 20 mA range and < 1 LSB from 100µA to 20 mA, 0 to 20 mA and 4 to 20 mA enhanced range. The module has a 1500 volt isolation capability between the field side and the logical side.

The IC693ALG223 16-channel analog input module has an input filter response of 200 Hz and an input impedance of 250 ohms. The maximum number of analog current input modules that can be installed in the system is: 4 for CPU 311, 313, and 323, 8 for CPU 331, and 12 for CPU 340 and 341. It has a high level of resolution and accuracy to handle very sensitive analog signals. It can receive analog inputs from a variety of sensors, such as level sensors, flow sensors, and temperature sensors. The accuracy of each channel is 4 microamps in the 4 to 20 mA current range, 5 microamps in the 0 to 20 mA current range, and 5 microamps in the 4 to 20 enhanced mA current range. It uses an external power supply with a voltage range of 20 to 30 volts DC and a 10% supply voltage ripple. The module is designed to support a wide range of industrial signals

IC693ALG223 16通道，单端模拟输入模块

【联系我们】

厦门雄霸电子商务有限公司

厦门市思明区吕岭路1733号创想中心2009-2010单元

联系人：珊妮

电话：18059884797