531X305NTBAPG1 作为NTB/3TB终端板

531X305NTBAPG1卡由通用电气开发，作为NTB/3TB终端板。此卡最初是为 531X 系列替换驱动板开发的。该板系列的成员适合安装到GE品牌的多个驱动器中。安装后，此卡提供对驱动器中找不到的许多接口工具的访问。应用包括串行和继电器输出、低电平模拟 I/O、编码器和电源。

联系电话：18059884797

立即咨询在线留言

产品详情

531X305NTBAPG1 作为NTB/3TB终端板

【功能描述】

安装 NTB/3TB 端子板可提供稳压和非稳压电源。主机驱动器可以从额定电压为 5 VDC 和 15 VDC 的稳压电源或额定电压为 24 VDC 或 120 VAC 的非稳压电源供电。用户可以配置多种电路板设置以符合特定的负载要求。 5V 和 15V 编码器可通过电路板上的跳线进行调整。该板还提供七个 A 型和 C 型继电器输出的组合。所有集成继电器均包括额定电压为 120 VAC 的触点。该卡还包含四个电位计，允许缩放低电平模拟I/O。

The 531X305NTBAPG1 card was developed by General Electric as an NTB/3TB terminal board. The card was originally developed for the 531X series replacement driver board. Members of the board family are suitable for installation into multiple drives under the GE brand. Once installed, this card provides access to many interface tools not found in the drive. Applications include serial and relay outputs, low-level analog I/O, encoders, and power supplies.

Installing NTB/3TB terminal boards provides both regulated and unregulated power supplies. The host driver can be powered from a regulated supply rated at 5 VDC and 15 VDC or an unregulated supply rated at 24 VDC or 120 VAC. Users can configure a variety of board Settings to meet specific load requirements. The 5V and 15V encoders can be adjusted via jumpers on the circuit board. The board also offers A combination of seven Type A and Type C relay outputs. All integrated relays include contacts rated at 120 VAC. The card also contains four potentiometers that allow scaling low-level analog I/O.