269-100P-HII设计了一个背光LED屏幕

269-100P-HI是GE公司生产的Multilin电机管理继电器。使用软件，用户可以使用269-100P-HI编程设定值，读取实际值，监控状态，并绘制和查看所选实际值的趋势图。该模块标配RS485通信。

269-100P-HI设计了一个背光LED屏幕(48个字符，字母数字)。显示屏下方有5个LED状态指示灯:脱扣、报警、辅助1、辅助2、服务。当一个输出被激活时，前四个LED指示灯将被点亮。服务LED仅在自检期间点亮。在前面板的底部是一个键盘，用于选择实际值，程序设定值，并选择报警和跳闸的原因。外壳防腐阻燃，符合IP40X标准。

联系电话：18059884797

立即咨询在线留言

产品详情

269-100P-HII设计了一个背光LED屏幕

【功能描述】

三相ct将输入电流信号缩放到269-100P-HI继电器。提供了一个单独的接地故障CT来测量输入接地故障电流。

269-100P-HI额定90-300 VDC/80-265 VAC控制功率。该模块通过UL认证，CSA认证，CE认证，并按照ISO标准制造。工作温度-25至+60摄氏度，湿度0-95%，不冷凝。

在安装过程中需要注意的是，虽然269-100P-HI的内部电路是屏蔽的，但为了尽量减少干扰，继电器应该安装在远离大电流导体或其他强磁场源的地方。269-100P设计用于安装四个垫圈和10-32 x 3/8螺钉。用户应该定位的单位，使前面板键盘是可访问的。

269-100P-HII设计了一个背光LED屏幕

The 269-100P-HI is a Multilin motor management relay manufactured by GE. With the software, users can programmatically set values using 269-100P-HI, read the actual values, monitor the status, and draw and view a trend graph of the selected actual values. The module is equipped with RS485 communication as standard.

269-100P-HI is designed with a backlit LED screen (48 characters, alphanumeric). Below the display are five LED status indicators: Trip, alarm, Assist 1, Assist 2, Service. When an output is activated, the first four LED indicators will be lit. The service LED is only lit during the self-test. At the bottom of the front panel is a keyboard for selecting actual values, program set values, and selecting the cause of alarm and trip. Shell anticorrosion and flame retardant, in line with IP40X standards.

Three-phase ct scales the input current signal to the 269-100P-HI relay. A separate ground fault CT is provided to measure the input ground fault current.

The 269-100P-HI is rated for 90-300 VDC/80-265 VAC control power. The module is UL certified, CSA certified, CE certified and manufactured according to ISO standards. Operating temperature -25 to +60 degrees Celsius, humidity 0-95%, non-condensing.

It is important to note during installation that although the internal circuit of the 269-100P-HI is shielded, in order to minimize interference, the relay should be installed away from a high-current conductor or other strong magnetic field source. The 269-100P is designed to fit four washers and 10-32 x 3/8 screws. The user should position the unit so that the front panel keyboard is accessible.