Product Description

The IS200BPPBH2B is designed as a safety I/O pack or auxiliary board. The model was designed to be used in conjunction with a larger circuit board.  This is a small board with few components. The board attaches to its motherboard using four standoffs and screw mounts that are inserted into brass-plated factory-drilled holes placed in each corner.  It should be noted three of the IS200BPPBH2B board edges are shaped, possibly to allow room for components on the motherboard.

The IS200BPPBH2B has two LED (light-emitting diodes) located along a board edge.  The board has two vertical connectors of different sizes and two phone jacks. It also includes an inductor coil, several capacitors, and integrated circuits, and several transistors.   One of the chips on the surface of the board is an AMD memory chip. This is located near the center of the board. Components have been marked with reference designators.

There is an operator interface that can be used with the IS210BPPBH2B model, the interface is referred to as an HMI or Human Machine Interface. This interface is designed as a Microsoft Windows NT PC operating system, it can support a graphics display system, client/server capability, a software interface, and a Control System Toolbox used for maintenance. Installation procedures may be found in publications from General Electric referencing part number IS200BPPBH.  This includes manuals and data sheets. Please follow all safety recommendations. As the original equipment manufacturer, GE provided all technical support for the IS200BPPBH2B.