IS200BLIGH1AAB 具有以太网功能的基于pc的操作界面

IS200BLIGH1AAB是ge为Mark VI系列设计的印刷电路板组件。Mark VI是Speedtronic系列的一部分，该系列始于20世纪60年代，发布了Mark I，并从那时起不断改进，技术更先进的系统。Mark VI包括一个具有以太网功能的基于pc的操作界面。

IS200BLIGH1AAB作为LAN接口- genius板。该单板用于辅助天才总线接口模块(IS215GBIAH)和辅助Profibus-DP接口模块(IS215PBIAH)的一半。这两个模块执行相同的任务:提供驱动器和控制器之间的集成，但在不同类型的网络上。卡和辅助卡的设置将完成模块，这取决于用户当前运行的网络类型。

联系电话：18059884797

立即咨询在线留言

产品详情

IS200BLIGH1AAB 具有以太网功能的基于pc的操作界面

【功能描述】

IS200BLIGH1AAB设计有五个板连接器。其中包括P8背板连接器，用于连接单板和机架系统。P1、P2和P3连接器用于连接单板和备用卡。在某些设置中不使用某些连接器。辅助卡使用支架安装到IS200BLIGH1AAB上。

IS200BLIGH1AAB由三个LED(发光二极管)组成，其中两个位于其前面板上。其中一个指示灯在两个模块上都标有“OK”。第二个LED可能被标记为“COMM OK”或“诊断”。第三个LED位于单板表面，指示给P5电源供电。关于该板和完成模块的更多信息可在GE出版物GEI-100419和GEI-100269中找到。

IS200BLIGH1AAB 具有以太网功能的基于pc的操作界面

The IS200BLIGH1AAB is a printed circuit board component designed by ge for the Mark VI series. The Mark VI is part of the Speedtronic series, which began in the 1960s with the release of the Mark I, and has continued to improve, more technologically advanced systems since then. Mark VI includes a PC-based interface with Ethernet capabilities.

IS200BLIGH1AAB serves as a LAN interface - genius board. The board is used for half of the auxiliary Genius Bus interface module (IS215GBIAH) and the auxiliary Profibus-DP interface module (IS215PBIAH). Both modules perform the same task: providing integration between the driver and controller, but on different types of networks. The setup of cards and auxiliary cards will complete the module, depending on the type of network the user is currently running on.

The IS200BLIGH1AAB is designed with five board connectors. These include P8 backplane connectors for connecting the board to the rack system. P1, P2, and P3 connectors Connect the board to the standby card. Some connectors are not used in some Settings. The auxiliary card is mounted to the IS200BLIGH1AAB using a bracket.

The IS200BLIGH1AAB consists of three leds (light emitting diodes), two of which are located on its front panel. One of the indicators is labeled "OK" on both modules. The second LED may be labeled "COMM OK" or "Diagnostic." A third LED is located on the surface of the board and indicates power to the P5 power supply. More information about the board and the completion module can be found in GE publications GEI-100419 and GEI-100269.